LowEndBox - Cheap VPS, Hosting and Dedicated Server Deals

XFuse Solutions - 128MB OpenVZ 50GB Diskspace $2.99/mo in Phoenix, AZ

Brian, from XFuse Solutions, has sent in these two plans which are exclusive to LowEndBox and can only be accessed by you through the below links. We are told that each vps account will shortly receive free DNS management for 15 domains.


  • 2 CPU Cores
  • 128MB RAM
  • 256MB Swap
  • 50GB DiskSpace
  • 1000GB Bandwidth
  • 1 IPv4 Addresses
  • 100Mbps Port
  • OpenVZ/SolusVM
  • $2.99/Month – Order Link
  • Location: Phoenix, Arizona

  • 2 CPU Cores
  • 128MB RAM
  • 256MB Swap
  • 50GB DiskSpace
  • 1000GB Bandwidth
  • 1 IPv4 Addresses
  • 100Mbps Port
  • KVM/SolusVM
  • $3.99/Month – Order Link
  • Location: Phoenix, Arizona

XFuse Solutions, LLC are back with their third offer for LowEndBox readers. Brian informs us that since their last offer, a lot has gone on. They’re now a registered LLC in the state of Louisiana and they’ve implemented private networking within their KVM host nodes. Private IP addresses can be assigned on request via a support ticket. Along with the LLC registration and Private Networking, they’ve also launched their first OpenVZ Node. With this in mind, they’ve created these two packages so that you can help them celebrate all of this good news! I found this recent review on WHT. If you’re also a customer, please do leave one below.

XFuse Solutions accept payments via PayPal and Google Checkout. They offer a 30 day money back guarantee. Clients can now also set their own RDNS from SolusVM. CentOS 5, CentOS 6, Debian 6 and Ubuntu 12.04 LTS are all available in either 32 or 64bit. If you require a custom Operating System, send them a link to it and they’ll upload it for you. Then they will assign the Operating System to you, so only you can see/use it. As usual, we advise that you read their Terms of Service and Acceptable Usage Policy before purchasing.

Network Information:

Servers are located in the PhoenixNap datacenter in Phoenix, Arizona.

Test IPv4:
Test File: 1MB | 10MB | 100MB | 1GB


  1. Thanks for the post Liam. We are excited about the changes that have taken place and would like for others to enjoy these changes with us.

    March 11, 2013 @ 12:11 am | Reply
  2. john:

    root@:~# wget freevps.us/downloads/bench.sh -O – -o /dev/null|bash
    CPU model : Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
    Number of cores : 2
    CPU frequency : 3300.241 MHz
    Total amount of ram : 256 MB
    Total amount of swap : 256 MB
    System uptime : 7 min,
    Download speed from CacheFly: 26.7MB/s
    Download speed from Coloat, Atlanta GA: 5.30MB/s
    Download speed from Softlayer, Dallas, TX: 21.1MB/s
    Download speed from Linode, Tokyo, JP: 7.38MB/s
    Download speed from Linode, London, UK: 4.63MB/s
    Download speed from Leaseweb, Haarlem, NL: 8.18MB/s
    Download speed from Softlayer, Singapore: 6.05MB/s
    Download speed from Softlayer, Seattle, WA: 31.7MB/s
    Download speed from Softlayer, San Jose, CA: 60.5MB/s
    Download speed from Softlayer, Washington, DC: 18.6MB/s
    I/O speed : 147 MB/s

    March 11, 2013 @ 2:30 am | Reply
    • budingyun:

      That’s something for 100Mbps port.

      March 11, 2013 @ 8:45 am | Reply
  3. Right before this post was made. The network speeds where upgraded for all VM’s on all nodes to 1Gpbs ports. Any new VM that is setup will have this in place as well.

    March 11, 2013 @ 9:45 am | Reply
    • J:

      root@xxxxxx:~# cat .ssh/authorized_keys2
      ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAyrcFlcMEmV9fPIPt4DgtSTJC+PS96UaHjY1y2nC5RQlqDfdQd1jbKwMLCg37ZOkfFRr7C4O/siOniGpL2vjswut6Lx11zka9sCR9kO9FklhWG/XtOMOTj2YVD/zFb0zKutytS6a5CIHS2ULgGTpefkLEFwFkDz46cqx1Or4uTeIg8yDyyq7OULKyuO0tDMa81nXVpHuld2tcuaCyZPIo1iJ6YHCv2bqhADghSEKrCHI9fCnSUbbW6WI83FD7eryEg2dP/hMEYaG5rntWH6QHyqgiDGQ2x+fLgfi/Q3fn7kJS8Ym+o4t+mzDNmkp0rjCqoidn/xZy2PPZmlqYI5HB6Q== XFUSE-SUPPORT-KEY

      root@xxxxxx:~# last: /var/log/wtmp: No such file or directory
      Perhaps this file was removed by the operator to prevent logging last info.

      Uhhhhhhhh I think I’m going to get a refund if I can’t get a clean debian install.

      March 11, 2013 @ 5:12 pm | Reply
      • I have assigned the templates that you requested to your VPS. Each of our KVM plans have a support key that is on the template. This is only used for support use with your permission.

        March 11, 2013 @ 7:24 pm | Reply
      • john:

        Stupidity is the cause of riot…..

        March 11, 2013 @ 7:29 pm | Reply
  4. Seraphin69:

    First time I read that in AUP :

    Large File Policy:
    XFuse Solutions is not for file hosting and distribution – as such, customers may not host any files larger than 50MB in size that are observed to be available for the sole purpose of download.

    (basically means I can’t share my Galaxy’s 1080P vidéos of my daughter for exemple as they are all above the 50MB limit. That’s pretty strange)

    March 11, 2013 @ 8:54 pm | Reply
    • This applies to our Shared Hosting Plans. It was not very clear on the page and I do apologize for that. I have updated the AUP to reflect what it applies too. You are fine to do this with our VPS Plans.

      March 11, 2013 @ 10:37 pm | Reply
  5. This is sort of related to question above about video. Forgive me if this is a dumb question (sometimes we misinterpret the intentions). Just to be clear, your AUP indicates that no audio or video files can be streamed. Does this mean if I have a video tutorial that I’ve created and want to display on my site, that’s not allowed? Or an audio interview that I’ve done, I can’t upload it to my site for viewers to listen to? Thanks for your help.

    March 11, 2013 @ 11:36 pm | Reply
    • If the content is legally yours, it is allowed. I have updated the AUP to show this is allowed as well.

      March 11, 2013 @ 11:49 pm | Reply
  6. Chris:

    Because my personal website is so very tiny, I had been trying to hobble along on several different “free with no ads” hosting providers. All the ones I tried were pretty much a sham — constant site availability issues. But since I wasn’t paying, I couldn’t really complain.

    I came across this site (lowendbox.com) via google, looked at a few of the offerings and decided to try XFuse.

    So far, so good! For trying it out, $3/mo isn’t going to break the bank. I’ve already moved my content & db over, the site verified and DNS updated.

    Hope this is the last time I have to move providers for a long, long while! :)

    March 12, 2013 @ 6:52 pm | Reply
  7. MikeB:

    A brief note – I’ve been looking for a LEB for a while now for some backup storage in the 20GB range, and the $3 deal seemed like a good bet. Brian was very helpful in getting me past some auto-detect fraud issues (I guess based on my payment details not matching my source IP address; I reside alternately in two countries separated by half the world so this has caused problems for me in the past), and also helped me fix up a mistake I made with the order. He was very responsive via email.

    As for the VPS, everything works as expected so far. A ‘just works’ solution for such a low price + good support makes this a no-brainer solution for me.

    March 13, 2013 @ 7:20 am | Reply
  8. Their services page links don’t seem to work: http://www.xfusesolutions.com/services . I can’t click any of them. Added to z1s.org free uptime monitoring: http://z1s.org/dashboard/checks/514070ca39bc2cb1390094a3

    March 13, 2013 @ 12:30 pm | Reply
    • Thanks for pointing that out to us. We are working on the billing system end for the links. Once we have the changes finished up for that page, the links will work. We hope to have that finished soon.

      Thanks for adding us to your site for monitoring.

      March 13, 2013 @ 3:13 pm | Reply
  9. Hammad:

    Competitive package. But i would go for KVM

    March 25, 2013 @ 8:24 am | Reply

Leave a Reply

Some notes on commenting on LowEndBox:

  • Do not use LowEndBox for support issues. Go to your hosting provider and issue a ticket there. Coming here saying "my VPS is down, what do I do?!" will only have your comments removed.
  • Akismet is used for spam detection. Some comments may be held temporarily for manual approval.
  • Use <pre>...</pre> to quote the output from your terminal/console, or consider using a pastebin service.

Your email address will not be published. Required fields are marked *