LowEndBox - Cheap VPS, Hosting and Dedicated Server Deals

QuickWeb - $4.99 384MB OpenVZ VPS in Germany

QuickWeb Roel from QuickWeb actually emailed me this a while ago and I was going to post this offer when their last offer is more than 30 days old. Well, INBOX mismanagement but it’s good that the offer is still available. This is a special March offer for the LowEndBox readers with upgrades. Use this link to order, and this is what you’ll get for $4.99/month

  • 384MB guaranteed/450MB burstable memory (upgraded from 256MB/384MB)
  • 10GB storage
  • 250GB/month data transfer on 100Mbps (upgraded from 10Mbps)
  • OpenVZ/SolusVM

Servers in Germany with Equinix. QuickWeb has pretty rock solid service, and LowEndBox.com is currently hosted on a VPS managed by QuickWeb (in Softlayer, Dallas TX). Cheap offers will get scarce though, according to Roel, as the IPv4 availability issue causing the price to go up. Small players will be purged I guess, or there will be more push towards IPv6.

66 Comments

  1. Hughesey's avatar

    More XEN please :).

    March 24, 2011 @ 4:43 am | Reply
  2. QuickWeb-Roel's avatar

    Thanks LEA for featuring us :)

    @Hughesey, contact me i can make you some Xen deal rg(at)quickweb.co.nz

    Pre paying annually will also lower down the price to $2.99/mo ($35.88/yr).

    This offer is also available on our Phoenix location, just order here LOWENDBOX DEAL just add details at the comment section about this LEB promo to get the free upgrade!

    March 24, 2011 @ 6:23 am | Reply
    • dd's avatar
      dd:

      Hi,

      Is this offer still open? Can I order for one month to test and then pay the yearly rate? Is this upgrade available for London also? I wish to take one at all three locations.

      April 1, 2011 @ 12:45 pm | Reply
  3. Wing Loon's avatar

    Does this deal for Germany and Phoenix comes with IPv6? Thank you.

    March 24, 2011 @ 8:27 am | Reply
    • QuickWeb-Roel's avatar

      hello, yes when they become available hopefully in the next 3 months.

      March 24, 2011 @ 9:27 am | Reply
      • Wing Loon's avatar

        Is it possible to have bandwidth upgrade to 500GB rather than memory upgrade? Thank you.

        March 24, 2011 @ 2:02 pm | Reply
  4. indonesia store's avatar

    another great deal at quickweb. i have 2 server with them 1 test box and 1 with supavps

    March 24, 2011 @ 9:17 am | Reply
  5. James's avatar
    James:

    @Quickweb-Roel
    How is the bandwidth limits on quickweb handled? I was looking at the VZ2 plan and it offers 2TB of bandwidth. What percentage of this is upload/download.

    March 24, 2011 @ 9:30 am | Reply
  6. Axionmak's avatar
    Axionmak:

    Best of the best.
    This is the second node i’ve order from them and the setup time was again < 3 min.
    No complains so far from the first node (UK@1Gbps)
    Keep the good work

    March 24, 2011 @ 10:01 am | Reply
  7. marrco's avatar
    marrco:

    Got, it, annual payment. Quick setup but no debian 6, not even in the control panel to do a reinstall.

    March 24, 2011 @ 10:56 am | Reply
    • QuickWeb-Roel's avatar

      yes debian 6.0 template is not yet production ready, we removed them due to some issues.

      March 24, 2011 @ 10:59 am | Reply
      • marrco's avatar
        marrco:

        ok, first they don’t offer Debian 6 templates at the moment, now second issue. I setup my VPS using standard lenny image, first login and first command i run is apt-get update && apt-get upgrade

        lots of errors, seems like they use an old image and i have to manually fix the sources.list

        i know these are minor glitches but i expected a little more for this provider. Just hope the node where my VPS is will be stable and fast.

        March 24, 2011 @ 11:41 am | Reply
        • QuickWeb-Roel's avatar

          All you need to do is open at ticket and that will be taken cared of if you need assistance, we are on schedule to update all other templates this end of month or first week april, we do it quarterly.

          March 24, 2011 @ 11:46 am | Reply
        • Rambaldi's avatar
          Rambaldi:

          Can you share the sources.list ? I have the same problem…
          Thanks

          March 24, 2011 @ 1:47 pm | Reply
        • marrco's avatar
          marrco:

          @Rambaldi dotdeb packages now are signed, so before apt-get you have to

          # gpg --keyserver keys.gnupg.net --recv-key 89DF5277
          # gpg -a --export 89DF5277 | apt-key add -
          

          than you can vi /etc/apt/sources.list

          #lenny
          deb http://ftp.de.debian.org/debian/ lenny main contrib non-free
          deb-src http://ftp.de.debian.org/debian/ lenny main contrib non-free
          # lenny release replacement mirrors for volatile sources
          deb     http://mirrors.kernel.org/debian lenny-updates main contrib
          deb-src http://mirrors.kernel.org/debian lenny-updates main contrib
          #security-lenny
          deb http://security.debian.org/ lenny/updates main contrib non-free
          deb-src http://security.debian.org/ lenny/updates main contrib non-free
          # my personal addon
          deb http://packages.dotdeb.org lenny all
          deb-src http://packages.dotdeb.org lenny all
          deb http://php53.dotdeb.org lenny all
          deb-src http://php53.dotdeb.org lenny all
          
          March 24, 2011 @ 3:12 pm | Reply
        • id's avatar
          id:

          change the /etc/apt/source.list accordingly. you can use cheatsheet from http://debgen.simplylinux.ch

          then run apt-get install debian-archive-keyring and do update/upgrade after that.

          March 24, 2011 @ 5:27 pm | Reply
        • drmike's avatar

          I hit errors with the Debian 5 install as well. Without knowing what errors you did hit *cough* *cough* it’s kind of hard to help with them though. Chances are though you;re hitting the same GPG issues I hit.

          Please give this a read though:

          http://en.kioskea.net/faq/809-debian-apt-get-no-pubkey-gpg-error

          There’s a thread over at LET about this as well:

          http://www.lowendtalk.com/questions/4399/problems-installing-exim4

          Hope this helps,
          -drmike

          March 25, 2011 @ 1:39 am | Reply
    • marrco's avatar
      marrco:

      ticket opened, and already answered. At least the support is fast. BTW, they’re not going to offer squeeze atm.
      > Debian 6.0 has issues and it has been removed
      > until further notice, have a great day.

      March 24, 2011 @ 11:19 am | Reply
  8. Matthew Rosenblatt's avatar

    IPv4 Availability at Softlayer is almost non-existent at this point. It’s pretty sad, actually. Softlayer used to hand out IPv4 addresses like candy and now those of us that need them for legitimate business purposes can’t really get them as easily. We hit IP number 7400 last week and got cut off by Softlayer as they’ve essentially run out of IP addresses themselves. Going direct with ARIN is the only way at this point, and there’s about 40 days left until ARIN is out of IP addresses.

    I dislike IPv4 right about now :D

    March 24, 2011 @ 11:08 am | Reply
    • NordicVPS's avatar

      IPv6 FTW! :)

      Its a shame that everyone get bugged by the IPv4 shortage but ISPs does not seem care about rolling out IPv6 to consumers.

      Anyone with an ISP that provides native IPv6 on their broadband?

      March 24, 2011 @ 11:16 am | Reply
      • Matthew Rosenblatt's avatar

        I personally don’t. Comcast is starting trials on IPv6 over here, but I wouldn’t hold my breath.

        The last time I enabled dual-stack on my Cisco router (WRVS4400N), everything decided to go haywire for my OS X and Linux machines.

        I wish everyone was native IPv6 already so we could get this transition over with.

        March 24, 2011 @ 11:22 am | Reply
        • ab's avatar
          ab:

          What is with american companies? I’ve gotten native v6 to home (multiple /48s with RDNS delegation+RWHOIS) since sometime in ’09 or 08

          March 24, 2011 @ 2:32 pm | Reply
        • ab's avatar
          ab:

          v6 has been out a very long time, and comcast hasn’t even started testing for enduserswtf

          March 24, 2011 @ 2:33 pm | Reply
      • SwordfishBE's avatar
        SwordfishBE:

        No :(
        I have been nagging with my provider forever.
        They don’t even have plans to deploy IPv6 for 2013 :(
        BTW they first response I got from my isp was ‘What is IPv6?’ a year ago.
        I’ve been tunneling since 2003.

        March 24, 2011 @ 1:24 pm | Reply
      • dd's avatar
        dd:

        IPv6 is a mess:

        http://cr.yp.to/djbdns/ipv6mess.html

        Instead of making every IPv4 address an *automatic* IPv6 address they have designed it poorly to create administrative burdens for everyone. Those who designed IPv6 were idiots who didn’t consult geniuses like DJB.

        March 24, 2011 @ 8:28 pm | Reply
      • Sidahmed's avatar
        Sidahmed:

        I am. My ISP support IPv6 (I don’t know if it native or not, how do I check?).

        I am with: http://www.blixtvik.se

        March 24, 2011 @ 10:39 pm | Reply
    • NordicVPS's avatar

      Microsoft pays $7.5m for IPv4 address stash – 666,624 IP address for $7.5 million, or $11.25 per address.

      http://www.pcpro.co.uk/news/366286/microsoft-pays-7-5m-for-ipv4-address-stash#ixzz1HcQUkynj

      March 25, 2011 @ 1:48 pm | Reply
  9. NordicVPS's avatar

    I am really looking forward to World IPv6 Day

    “On 8 June, 2011, Google, Facebook, Yahoo!, Akamai and Limelight Networks will be amongst some of the major organisations that will offer their content over IPv6 for a 24-hour “test flight”.”

    Read more here and see how we/you all can take part: http://isoc.org/wp/worldipv6day/

    March 24, 2011 @ 11:36 am | Reply
    • LEA's avatar

      Yes I am hoping to have some of my sites ready for the World IPv6 day. My Xen VPS with QuickWeb in Softlayer still has IPv6 borked (traffic does not flow when it go to the host box).

      March 24, 2011 @ 11:24 pm | Reply
    • dirk's avatar

      They will have it for 24h???? Why from that day on….shows that they aren’t realy ready for ipv6 :-(

      March 25, 2011 @ 1:01 pm | Reply
  10. marrco's avatar
    marrco:

    and this is a speed test for they Dusseldorf node

    wget cachefly.cachefly.net/100mb.test
    --2011-03-24 13:08:55--  http://cachefly.cachefly.net/100mb.test
    Resolving cachefly.cachefly.net... 140.99.94.175
    Connecting to cachefly.cachefly.net|140.99.94.175|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 104857600 (100M) [application/octet-stream]
    Saving to: `100mb.test'
    
    100%[======================================>] 104,857,600 8.47M/s   in 12s
    
    2011-03-24 13:09:07 (8.57 MB/s) - `100mb.test' saved [104857600/104857600]
    
    March 24, 2011 @ 12:17 pm | Reply
  11. SwordfishBE's avatar
    SwordfishBE:

    You can’t go wrong with Quickweb.
    My XEN in Germany has been rock solid.
    Been with them for 5 months now.
    Current uptime 77 days.

    March 24, 2011 @ 1:26 pm | Reply
  12. Bob's avatar
    Bob:

    No love for the states?

    March 24, 2011 @ 11:14 pm | Reply
  13. Salvatore's avatar
    Salvatore:

    Fast setup with QuickWeb SUPA 2. ~5 minutes. I will comment any problems and tests.

    March 24, 2011 @ 11:24 pm | Reply
  14. drmike's avatar

    +1 for the Quickweb folks. :)

    March 25, 2011 @ 1:40 am | Reply
  15. QuickWeb-Roel's avatar

    we have updated the debian 5.0 templates and about to roll it out on all OpenVZ nodes, this addressed the issue with the repos :)

    March 25, 2011 @ 4:37 am | Reply
    • James's avatar
      James:

      Thanks! Also, to anybody else… I highly recommend Quickweb VZ2 package if you’re planning on getting a OpenVZ VPS.

      March 26, 2011 @ 3:43 am | Reply
  16. innya's avatar
    innya:

    This is better deal then fanaticalvps (germany) offer if you pay annually.

    March 25, 2011 @ 4:54 am | Reply
  17. ilias's avatar
    ilias:

    Hello,

    You mention 384MB guaranteed/450MB burstable memory but clicking on the offer’s link I get the following product:

    SUPA VPS PLANS – QW Budget Box VZ II (DE)
    SolusVM/Linux 1 x Core Xeon 3440 (shared), 256MB RAM 384MB Burst, 10GB, 250GB Bandwidth, 10Mbit Port – 1 x IP address

    Which one is correct?

    March 26, 2011 @ 1:09 am | Reply
    • QuickWeb-Roel's avatar

      That is our standard ordering page, this is just special offer to LEB reader so you must open a ticket to get the upgrade or make a comment in order page.

      March 26, 2011 @ 11:35 am | Reply
      • BluePanda's avatar
        BluePanda:

        Roel, could you take a look at my question below please, i think you may have missed it because you normally have good response times :)

        I am just waiting for those to be answered before i order :)

        March 28, 2011 @ 4:03 pm | Reply
  18. BluePanda's avatar
    BluePanda:

    Do you guys offer space/bandwidth upgrades? If so then how much would it be to add more space and how much for bandwidth?

    Also, what about memory addons without upgrading?

    March 27, 2011 @ 6:34 pm | Reply
    • QuickWeb-Roel's avatar

      hello, we do not discuss upgrade prices in public as it varies please open a sales ticket thanks.

      April 2, 2011 @ 8:47 am | Reply
  19. Suniil's avatar

    i know this is not the right place to post, but since my account at quickweb was deleted i can’t open a new ticket without opening one more account

    with reference to ticket no. 942668 i was given a VPS for one month cause my previous vps didnt work properly. i was told that my account would be valid for one month from the date the new VPS started, but within 15 days my VPS was shut, my account was deleted without informing me. i was out of town for a vacation and when i came back i got this surprise. all my sites were down for 5 days and i lost all my loyal visitors cause of their mistake.

    this is the second change with quickweb and they failed.

    kindly return my money back

    March 28, 2011 @ 7:33 pm | Reply
    • QuickWeb-Roel's avatar

      Greetings,

      This is unfortunate to hear, I will look into it, you must have received invoice and once it was left overdue for certain number of days it will automatically be removed by the system.

      Roel

      March 28, 2011 @ 7:45 pm | Reply
    • QuickWeb-Roel's avatar

      Hello,

      I had a look and saw the system generated invoice with due date March 2, you originally subscribed suscribed 30/1/2011, so it’s got the whole february running and the system automatically removed on the 5th or 6th after several overdue notices and suspension notices.

      You should’ve contacted us immediately because we got automated system, please email me directly rg(at)quickweb.co.nz

      Roel

      March 28, 2011 @ 8:00 pm | Reply
      • Sanjay's avatar

        right… but i was allotted a new VPS on 22nd feb for one month so i ignored the invoice….

        i am contacting now as i was not in town…..

        its not my mistake…. when u allotted me a new VPS for one month u should make sure u update the billing department also…

        March 29, 2011 @ 11:02 am | Reply
        • QuickWeb-Joe's avatar

          Yes simple email from you will allow us to remove invoice generated we should have corrected it for you.

          March 29, 2011 @ 7:13 pm | Reply
        • Sanjay's avatar

          i refund u to refund the money as i have not used the VPS and i have bought another VPS

          March 31, 2011 @ 12:38 pm | Reply
        • Sanjay's avatar

          i request u to refund the money as i have not used the VPS and i have bought another VPS

          March 31, 2011 @ 12:38 pm | Reply
  20. Vince Rodriguez's avatar

    I have 7 VPS with these guys. All working great and support response was very impressive.

    Ive been experimenting with 5 other hosting but Quickweb would still be my favorite. :D

    thanks!

    March 30, 2011 @ 9:38 am | Reply
  21. Antony's avatar
    Antony:

    Would it be possible to know a test IP in germany & london (supa)?

    BTW, what’s the difference between your “SUPA” VPSes and the other ones?

    Thanks :)

    March 30, 2011 @ 3:53 pm | Reply
  22. QuickWeb-Roel's avatar

    this offer is extended till 15 of April or while stocks last thanks.

    April 1, 2011 @ 11:32 pm | Reply
  23. Venax's avatar
    Venax:

    Is the port 10 Mbps or 100 Mbps?

    Here’s its 100 but on orderpage it’s 10.

    Or should i just contact you as this is special offer for LEB?

    April 2, 2011 @ 12:33 am | Reply
    • QuickWeb-Roel's avatar

      we will upgrade to 100Mbit for all orders coming from this site, just put on comment section.

      April 2, 2011 @ 8:48 am | Reply
  24. drmike's avatar

    For those in their San Jose datacenter, they’re going to have some power issues in a day or so:

    http://secure.quickweb.co.nz/system/announcements.php?id=24

    And they’re having another sale:

    http://www.webhostingtalk.com/showthread.php?t=1038278

    I;m falling asleep so I can barely read all that.

    April 10, 2011 @ 12:40 am | Reply
    • QuickWeb-Roel's avatar

      Thanks Mike, it is hard to say goodbye to our nodes average uptime at San Jose, but nothing we can do as it is facility’s power maintenance.

      #uptime
      15:20:19 up 174 days, 17:58, 1 user, load average: 0.25, 0.20, 0.12

      April 10, 2011 @ 3:22 am | Reply
  25. feenom's avatar
    feenom:

    I see this link still works and you can actually choose 35.88/year option in cart. Is the free 100Mbit port still good too if we put that in comment during order?

    June 8, 2011 @ 3:48 pm | Reply
  26. Angry Customer's avatar
    Angry Customer:

    I have one of this boxes, but it’s not working at all.

    Their helpdesk tried several times to rebuild it, with no luck.

    I have 2 more boxes with them with no problem, but the way they are handling this issue is unbelievable.

    If they give me permission, I will post ticket information so you can see the way they answer.

    On this box I can’t even install apache, and the only way to rebuild the vps is opening a ticket ’cause from solus simply won’t work

    Just 2 more words : Epic Fail!!!!!

    September 3, 2011 @ 8:21 pm | Reply
    • tinyray's avatar

      Is that the new one? This case could happen with all providers. I think they will be able to fix it.

      September 3, 2011 @ 9:45 pm | Reply
      • Angry Customer's avatar
        Angry Customer:

        Well, it’s working now!! After bad words I can now give credit to the admin who understood the issue.

        They had a template issue on “my” node that finally got solved.

        Angry Customer turning back to Satisfied ;)

        September 4, 2011 @ 12:35 am | Reply
        • drmike's avatar

          Even I had to bump up a ticket to admin once a while back.

          September 4, 2011 @ 12:06 pm | Reply

Leave a Reply

Some notes on commenting on LowEndBox:

  • Do not use LowEndBox for support issues. Go to your hosting provider and issue a ticket there. Coming here saying "my VPS is down, what do I do?!" will only have your comments removed.
  • Akismet is used for spam detection. Some comments may be held temporarily for manual approval.
  • Use <pre>...</pre> to quote the output from your terminal/console, or consider using a pastebin service.

Your email address will not be published. Required fields are marked *