Low End Virtual

BurstNET – $6.36 512MB Windows VPS, $4.76 512MB OpenVZ VPS

BurstNET Burst.Net has just sent me their current offer. 20% off Xen HVM-based Windows VPS was previously only available in Miami, but now with coupon code US20WIN, you can get the same discount in also Los Angeles CA and Scranton PA. “VPS PACKAGE #1” is now $6.36/month after the discount.

  • 512MB memory
  • 20GB storage
  • 1000GB/month data transfer
  • 2x IPv4 + IPv6
  • Xen HVM/SolusVM

There are heaps of OS to choose from — as long as it is Windows 🙂 Budget Windows VPS will also be available in UK by the end of month, although it wasn’t clear whether the discount code can be applied to UK Windows VPS.

Their OpenVZ-based Linux VPS is also on sale at 20% off recurring discount when you apply coupon code MEMBANK20. Promotion expires 15 July. “VPS PACKAGE #1” in this case would be $4.76/month.

  • 512MB memory
  • 20GB storage
  • 1000GB/month data transfer
  • 2x IPv4 + IPv6
  • OpenVZ/vePortal

Again, the discount is available to all budget OpenVZ VPS in Scranton, Miami and Los Angeles. I think there is enough say about BurstNET here on LowEndBox. Lots of budget providers use their facility or lease servers from them. Probably one of the biggest listed on this blog. They don’t have many votes on the current poll at the moment.

201 Comments

  1. tuzvihar's avatar
    tuzvihar

    Hello,

    I’d like to know if there is any way to test speed and ping to your servers? I am interested in both US and UK.

    Thanks

      • rm's avatar
        rm

        $ ping6 2607:F878:1:634::3
        PING 2607:F878:1:634::3(2607:f878:1:634::3) 56 data bytes
        ^C
        — 2607:F878:1:634::3 ping statistics —
        3 packets transmitted, 0 received, 100% packet loss, time 1999ms

      • rm's avatar
        rm

        $ ping6 2607:F878:3::2
        PING 2607:F878:3::2(2607:f878:3::2) 56 data bytes
        From 2607:f878::183 icmp_seq=1 Destination unreachable: Address unreachable
        ^C
        — 2607:F878:3::2 ping statistics —
        4 packets transmitted, 0 received, +1 errors, 100% packet loss, time 3023ms

      • dmmcintyre3's avatar
        dmmcintyre3

        Same here. (I pinged google just to show my IPv6 works)

        [root@claw ~]# ping6 ipv6.google.com
        PING ipv6.google.com(qw-in-x67.1e100.net) 56 data bytes
        64 bytes from qw-in-x67.1e100.net: icmp_seq=0 ttl=57 time=43.1 ms
        64 bytes from qw-in-x67.1e100.net: icmp_seq=1 ttl=57 time=41.9 ms
        64 bytes from qw-in-x67.1e100.net: icmp_seq=2 ttl=57 time=72.3 ms
        
        --- ipv6.google.com ping statistics ---
        3 packets transmitted, 3 received, 0% packet loss, time 1999ms
        rtt min/avg/max/mdev = 41.966/52.489/72.311/14.027 ms, pipe 2
        [root@claw ~]# ping6 2607:F878:3::2
        PING 2607:F878:3::2(2607:f878:3::2) 56 data bytes
        From 2607:f878::1a8 icmp_seq=0 Destination unreachable: Address unreachable
        
        --- 2607:F878:3::2 ping statistics ---
        5 packets transmitted, 0 received, +1 errors, 100% packet loss, time 4009ms
  2. Keith T's avatar
    Keith T

    just tried promo code for LA package 1 512k, it validates but says it is not applicable see terms of promo code

  3. Keith T's avatar
    Keith T

    but the caption implies that promo code would work for UNIX,

    • Ixape's avatar
      Ixape

      Yup – Speed is slow. You’d think you’d be able to obtain a decent speed buying direct from a data centre where they have tons of bandwidth at their disposal!

      I contacted support too about the speeds and was told they couldn’t find any problems and said it was working fine.

      • BurstAndrewR's avatar
        BurstAndrewR

        Hi,

        Do you have a ticket open with our technical support department regarding this issue? If so, can you provide your ticket #? I was able to locate your VM and the node this is hosted on his performing exactly as expected from a network perspective. I’d like to take a look at your VM to see if we can tweak a few settings on it to improve it’s performance.

        Thank you!

  4. sandeep thomas's avatar
    sandeep thomas

    Please see the ticket #2771802. i really hope to change to 64bit windows.

    the services are good, uptime is great and speeds are good for me. would continue using your service for a long time

    thank you

    • sandeep thomas's avatar
      sandeep thomas

      already done.. awesome support

  5. zx123's avatar
    zx123

    the response about the speed:

    (Joseph Jacob)
    ———————————————–
    Hello,

    4Mb/s is about average for our Windows nodes. You may have experienced slower speeds and I/O earlier due to a heavy usage client that was suspended.

    Thank You,

    LOL my home connection is more fast (6Mb/s)
    I suggest who want buy a win vps DO NOT BUY FROM THEM 😉
    search and find another company… you have to pay few $ more but you can get a good speed.
    This is my first and LAST order in burst.net.
    I suggest LEB to open a poll vote…. its sure that burst.net get a negative vte from me 😉
    bad bad bad

    • BurstAndrewR's avatar
      BurstAndrewR

      Hi,

      If you’re experiencing an issue with download/upload speed on your VPS and you appear to be maxing out at about ~4MB/s (equivalent to about 32Mbit/s), please open a ticket with our technical support department at support@burst.net. We’ve noticed this appears to happen from time to time with the default NIC that Xen is set to emulate. A switch to an alternative emulation appears to resolve the issue. Installing the GPLPV drivers also provides a large boost in performance if you wish to try those. In either case, our technical support department can assist you with switching the emulation or helping with driver installation to eliminate this issue.

      Thank you!

      • zx123's avatar
        zx123

        my speed is 4megabit not 4Megabyte!!! I open the ticket and the reply was:

         (Joseph Jacob)
        ———————————————–
        Hello,
        
        4Mb/s is about average for our Windows nodes. You may have experienced slower speeds and I/O earlier due to a heavy usage client that was suspended.
        
        Thank You,

        I repeat: 4Mb/s the “b” not is in upper case so it is “bit” and not byte!
        but if dont understand the difference check this pic: http://www.speedtest.net/result/1378015806.png

        • zx123's avatar
          zx123

          this is 3megabit/s = 160kilobyte/s
          PLEASE don’t try to confuse the customers!!
          I dont understand why LEB after all these BAD reviews, shows this bad company here!

        • BurstNET's avatar
          BurstNET

          Threatening us will not get you anywhere, nor will complaining and throwing a fit on LEB.

          Our technical support department can assist you with switching the emulation or helping with driver installation if you contact them again…which should resolve your issue.

          BURSTNET

    • Ixape's avatar
      Ixape

      To be fair I’ve been able to achieve speeds of 16Mb/s using some programme which uses multiple connections.

  6. Asim Zeeshan's avatar
    Asim Zeeshan

    Just cancelled my Windows and OpenVZ VPSes with Burst.NET because of the insane issue (read here) where my services are not accessible by me but BurstNET replies in support that they see no issues.

    • BurstNET's avatar
      BurstNET

      I’m sorry to hear that, but we cannot replicate your issue, and you are the only one that seems to be having such claimed outages like this. We cannot fix what we cannot verify or replicate. We have no reason not to want to fix it, if indeed such an issue exists.

      That specific node you list has been operational just fine:

      [root@xserver4000 ~]# w
      05:45:35 up 26 days, 10:06, 1 user, load average: 5.82, 5.75, 5.44

      We attributed some of your issues potentially to your firewall, but cannot replicate/see any other issues as you report them.
      If these issues would be occurring, for everyone on the same node, or everyone at that POP, we would know, as we would be getting dozens of complaints, and our monitoring systems would be going off…and they just have not been such. There are thousands of clients serviced at this same POP. We can only assume this is an isolated issue, possibly related to your location/ISP, firewall, configuration, etc…

      If this was speed related issues on the SolusVM Windows nodes, which is what most of the other clientele in this thread reported, and not small random outages like you are claiming, then I would say it is a NIC driver update required, as explained here a few posts up, but that is not the case. but with you claiming random small outages, and us not being able to verify or replicate such, not any other reports of the same exact issue, unfortunately there is not much we can do to assist you further…

      BURSTNET

    • Asim Zeeshan's avatar
      Asim Zeeshan

      For the record. I fail to see how my NAGIOS machines can report that same VPS to be “fine” and randomly almost 5-10% of the time (8-10hours per month) its in-accessible.

      Don’t trust my NAGIOS installation? Ok how about Pingdom? you dont even take Pingdom reports as a sign that there is something wrong, I have shared links to pingdom Public reports in the tickets as well (http://stats.pingdom.com/bhhy8w5fp1o9/345821/2011/06). I am not saying its your node, probably some intermediate hardware (firewall etc).

      And I have been a Windows user (primarily) since 1992, I know its firewall. It either blocks traffic OR dont block it but does not keep switching inbetween. How can the same monitors say its online and for 8-10 hours every month it is reported as offline?

      Chris requested in a ticket#100-2716454

      Are you able to set your network monitor to send an e-mail to more than one place when it registers a down system? If so, you could have your monitor program notify us so your downtime is minimal.

      I followed up with what email these alerts should go to and never heard back.

      Your own staff member, Chris, told me this (ticket #100-2755742)

      I’ve been able to locate the following in the logs, but as far as I can tell they don’t really indicate any specific issue and they occurred after your logs state that the VPS went offline. Do you have any errors within Windows?

      Jun 30 07:34:53 xserver4000 kernel: eth0: port 42(vifvm163.0) entering disabled state
      Jun 30 07:34:53 xserver4000 kernel: device vifvm163.0 left promiscuous mode
      Jun 30 07:34:53 xserver4000 kernel: eth0: port 42(vifvm163.0) entering disabled state
      Jun 30 07:34:55 xserver4000 kernel: device vifvm163.0 entered promiscuous mode
      Jun 30 07:34:55 xserver4000 kernel: ADDRCONF(NETDEV_UP): vifvm163.0: link is not ready

      As I explained previously, I rest my case.

      • BurstNET's avatar
        BurstNET

        None of that helps us find, verify, or replicate your claimed issue.
        We have no reason not to want to help you, or not find the issue, or not fix it.
        I know that does not help you, but unfortunately, this is going to be a case of unless we get further clients complaining of the same issue, or magically all of a sudden see what you are seeing, there is nothing we can do further to assist you.
        All we can do is chalk this up to gremlins somewhere out there at this point, and wish you well post cancellation.

        BURSTNET

        • Yomero's avatar
          Yomero

          Replicate network random issues… nice idea, is like… magic.

        • Asim Zeeshan's avatar
          Asim Zeeshan

          Thanks for the well wishing. I hope you track down that random issue soon for the rest of your clients

        • Asim Zeeshan's avatar
          Asim Zeeshan

          @Yomero A network admin knows how to track network issues. Its the same as if would say “random code bugs, nice idea … is like magic” but every other developer needs to find those random little buggers called defects and fix them 🙂

        • BurstNET's avatar
          BurstNET

          There is no need to track anything down, as now that you have cancelled, we have no clientele reporting the issue that you were claiming to be having… 😉

          BURSTNET

        • Glass's avatar
          Glass

          And next time, don’t forget you are a tiny low end customer and they are a big company! 😛

      • BurstAndrewR's avatar
        BurstAndrewR

        Hi,

        Unfortunately without being able to specifically look at your VPS and enable some additional QEMU logging, it’s difficult to speculate on the nature of this issue. What I can say is there is no firewall between your VPS and the rest of the Internet that we run that would be causing that problem. That’s not to say another device may or may not be causing that issue, but from the data provided its hard to speculate. If it was however, that generally would be causing a wider issue then just a single VPS.

        Its possible this may have been related to CPU timing between the hypervisor and Windows that caused it to crash and that enabling viridian extensions would have resolved, but again without being able to specifically look at the container logs (and event viewer), that’s hard to say.

        • Asim Zeeshan's avatar
          Asim Zeeshan

          Andrew, thanks for checking in but it does not matter now. I gave you guys ample days to figure it out (via support ticekt). Now I cancelled and its been terminated as of today (8 hours ago approx).

          I had a huge argument in ticket#100-2755742 asking for a check and double check but no body bothered to check this the way you describe it could be checked.

          Anyway, its over for me.

  7. Ixape's avatar
    Ixape

    Perhaps BurstNET should purchase a Pingdom account…

  8. Pham Tung's avatar
    Pham Tung

    This company support suck.
    I tried to order ~5 times but always fail.
    And received email requires some documents.
    Send all requirement and never receive reply
    Very bad support!!!
    Do not use them

  9. LewisD's avatar
    LewisD

    So far so good. Got the base budget pkg back on 26th June, with direct admin, good price made even better w/promo. I just upgraded to the next pkg up with, like I’d thought of doing at first, since I wasn’t sure just how much DA might need. At first I didn’t think my promo discount would transfer to the next level,(it didn’t work automatically through the panel), however that was fixed up by the billing dept; so I think this pkg (VPS Package #2) should do well memorywise for starters. No downtime other than my own;a few reboots/reinstalls initially. No real issues, had some questions, setup, ptr record request, etc, all answered much quicker than expected,by either Brian,Benji,or Guy. Jennifer on the billing questions. The performance is as good as it was at first, a few slowdowns here and there, depending on the time of day,(or perhaps my ‘box neighbors’) nothing unbearable…on the Miami datacenter. I like it.

  10. Sebastian's avatar
    Sebastian

    Just bought a Windows Vps in Los Angeles but it will not boot

    • BurstNET's avatar
      BurstNET

      Please contact our Support Dept, and they will gladly assist you.
      We do not provide support thru LEB…

      BURSTNET

  11. mark's avatar
    mark

    was about to buy vps from these guys until i see the way burstnet speak to people and customers on here… very unprofessional. thank god i did not purchase.

    • BURSTNET's avatar
      BURSTNET

      What…the fact that we are brutally honest, blunt, all-business, to the point, and don’t put up with nonsense, bothers you? 😉

      BURSTNET

      • Jim's avatar
        Jim

        it sickens me to see a company speak to people like this. you really are terribly unprofessional son.

        • BURSTNET's avatar
          BURSTNET

          You are entitled to your opinion.
          As are we…to disagree with you.

          BURSTNET

  12. Robb's avatar
    Robb

    I’ve been using BurstNet for a fairly low end windows vps for some time now. Initially, I bought the low-end box special, then paid for the upgrade and have been a happy camper ever since.

    For me, the fact that I’ve had zero down-time and perfect system stability, all with good throughput has meant that my handful of marketing apps keep going with no babysitting required on my part.

    I’ll be purchasing another mid-range windows vps in the next day or two, again from BurstNET. Frankly, I can’t see any compelling reason to try another provider when I can go with Burst at $12.95/month.

  13. certcd4u's avatar
    certcd4u

    >>
    Their OpenVZ-based Linux VPS is also on sale at 20% off recurring discount when you apply coupon code MEMBANK20. Promotion expires 15 July. “VPS PACKAGE #1″ in this case would be $4.36/month.
    >>

    Any update for coupon code ?

  14. shell's avatar
    shell

    hoy me dieron, :D! xD

  15. sandy zheng's avatar
    sandy zheng

    184.22.31.120 is the IP BurstNET rooms do? This is very fast, don’t know how we can get the IP of the VPS?

  16. rxp's avatar
    rxp

    truth if they do not pay my order CONSCIOUS and I will deliver the order and 1 week -.-

    The media does not understand anything, until and I therefore claim to be the name of several. Chuck D, Colin Joyce, Adam H. ….

  17. juan's avatar
    juan

    are swindlers, I want to charge for more expensive vps that I did not ask and I do not want to repay the money

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *