Via this WHT offer. 2HOST, a hosting company that claimed to have 7 years of experience (and with a domain that has been registered since 2001), is offering a “try us out” 512MB Xen VPS for $5/month — this week only (via this order link). You get:
- 512MB memory/1024MB swap
- 10GB storage
- 300GB/month data transfer
- HyperVM
Again from their about page, they have their own DC and their servers are in St. Louis MO. My immediate response is the same as the comments in the dicussion thread — “why come it’s so cheap?” According to their response it’s “because they can” and they would want to scale to 200 servers. According Wayback Machine the domain used to be owned by a CA company with servers in Chicago so I guess the ownership might have been changed, which has been confirmed by this WHT thread.
Well. It’s just $5/month…
Featured Offers

Have you benchmarked your server yet?
Run a free ServerVerify benchmark and compare real-world CPU, disk and network performance with community-tested VPS and dedicated servers.
Related Posts:

Happy 28th Birthday, Silicom Network! Get Shared Hosting for $3/Year! Cheap Reseller Hosting, Too!

Silicom Network: Cheap cPanel Shared Hosting Starting at Only $4.50/YEAR!

Silicom Network Has Gone Nuts: $3/YEAR for cPanel Shared Hosting!

Get Shared Hosting for Only $3.50/Year with VisualWebTechnologies!

HostSailor: KVM, XEN, or OpenVZ in the Netherlands from $1/mo!

So I used wget to test the download speed of my VPS and got 9.24MB/s which downloaded a 43.4megabyte file in 4.5seconds, which is amazingly fast IMO. In case you want to try to download from a fast site I downloaded the following file.
wget http://download.virtualbox.org/virtualbox/3.0.4/virtualbox-3.0_3.0.4-50677_Debian_lenny_i386.deb
I then downloaded that file(http,ftp,and scp) from my VPS to my home computer and the best speed I saw was about 550KB/s. My home connection is pretty reliable and levels off at 3.0MB/s so I’m guessing that I am not getting full speed either because I am physically located on the other side of the U.S.(I have a 75ms ping), or because the server which hosts my VPS has an upload limit which is being used up by other people who have a VPS on the same server.
I too live outside the U.S. and pinging the VPS gives something around 167ms but my download speed is unaffected and still top at ~2.2MB/s from home. Kind of strange, but it’s probably because it never leaves the Level3 backbone. Though, I don’t know for sure.
—-
[ISP network]
5 230 ms 96 ms 55 ms te-9-1.car2.Paris1.Level3.net [212.73.207.189]
6 46 ms 45 ms 45 ms ae-34-52.ebr2.Paris1.Level3.net [4.69.139.225]
7 54 ms 53 ms 54 ms ae-2-2.ebr1.Frankfurt1.Level3.net [4.69.141.234]
8 54 ms 55 ms 54 ms ae-91-91.csw4.Frankfurt1.Level3.net [4.69.140.14]
9 54 ms 55 ms 54 ms ae-92-92.ebr2.Frankfurt1.Level3.net [4.69.140.29]
10 144 ms 143 ms 144 ms ae-41-41.ebr2.Washington1.Level3.net [4.69.137.50]
11 161 ms 161 ms 162 ms ae-2-2.ebr2.Chicago2.Level3.net [4.69.132.69]
12 173 ms 162 ms 163 ms ae-5.ebr2.Chicago1.Level3.net [4.69.140.193]
13 168 ms 168 ms 169 ms ae-4-4.car2.StLouis1.Level3.net [4.69.132.189]
14 209 ms 204 ms 203 ms ae-11-11.car1.StLouis1.Level3.net [4.69.132.185]
15 168 ms 167 ms 169 ms RIVER-CITY.car1.StLouis1.Level3.net [4.53.160.10]
[VPS IP]
—–
@nullamatix
using this command
dd if=/dev/urandom of=/tmp/100MB-random.img bs=1M count=100
i got this results
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 14.5247 s, 7.2 MB/s
but can you or someone tell me what is this result mean and is it good or bad?
next
@cling[y]
i’ve tried your command
wget http://download.virtualbox.org/virtualbox/3.0.4/virtualbox-3.0_3.0.4-50677_Debian_lenny_i386.deb
and i got
43,412,246 8.56M/s in 5.0s
but in general when i try like apt-get install something or wget i got averege 995 kbps
so in light of this
i would like to test how fast can i upload stuff.
is it posible to test this?
best regards and thank you all
i’ve learned a lot here.
@Dalibor
I’ve been wanting to test the speed of my VPS also but haven’t found an easy way…the wget command you ran shows that your VPS is capable of download at least 8.5 Megabytes/second so your apt-get command is probably slow because by default 2host has it configured to download from a mirror in the UK instead of a closer/faster mirror, you could speed that up by finding a closer/faster mirror.
The command that you ran:
dd if=/dev/urandom of=/tmp/100MB-random.img bs=1M count=100
pretty much just created a 100megabyte file in your /tmp/ directory, you can then try to download that file to your home computer(if you have a fast conneciton at home) to test how fast your VPS can upload. If you don’t have a web server or ftp server setup, you can use scp to download the file from your VPS to your home computer to check the speed. You can also do the same thing with a python webserver which has been faster for me than using scp. So to do this you would ssh to your VPS and do:
cd /tmp/
python -m SimpleHTTPServer
That will create a web server on your vps which runs on port 8000, so then on your home computer open up your web browser and navigate to http://you.IP.addy.Here:8000 and you should see all the files in your /tmp/ directory, so just click on 100MB-random.img to download it and see how fast it goes.
After your done downloading just kill the ‘webserver’ by going back to your ssh window and pressing ctrl + c
Update, so far the fastest speed I’ve seen from my VPS to my home is 783KB/s
@Dalibor
What cling[y] sums it up. You can use that file as a baseline test. From a Linux host in your LAN, just run:
wget http://hostname-of-2host-vps.com/100mb-random.img
After putting 100mb-random.img in public_html or your web server document root..
Thank you for kind and gr8 answer. I’ll try it up then i’ll post the results..
Best regards
from Croatia
Uptime: 07:02:04 up 175 days, 9:13, 1 user, load average: 0.00, 0.00, 0.00 – wow I have never seen such uptime 🙂
Well it was my BEST performance experience, however it was the WORST support experience at the same time. Highly recommend their vps only if you don’t need support at all 🙂 Now I’m quitting with them just because I’m moving my developing service from alpha stage at VPS to beta at dedicated, so I don’t need this vps anymore. It was great half a year with them.
I can also rank by performance some of the vps from this great blog with which I had experience:
1. 2Host
2. Rentavps
3. Sitepenguin
4. Boxvps
5. Burst
And by support:
1. Rentavps
2. Boxvps
3. Sitepenguin
4. Burst
5. 2Host
Just got my 512MB VPS from them set up. I ordered it yesterday around 1PM eastern, and it was set up about 7PM eastern tonight, so about 30 hours for setup. That’s not too bad, but quicker is better. Have yet to try what I bought it for (srcds), but I have pretty decent hopes. 10GB of disk space, 512MB ram, approx 300GB bandwidth and Xen for $10 a month isn’t bad (at least for my purposes).
Does anybody know a way to confirm it is indeed Xen?
2Host $10 VPS 512 is indeed Xen. My 512 2Host Xen Vps outperforms my 1g OpenVZ VPS. Setup time was also a little slow for me but having never needed support apart from requesting the HyperVM login details.
I should be able to compile my own custom kernel, correct? I’ve gotten the latest source, added the xen options, and make a few timer tweaks I need, but now I’m confused on how to make that kernel be used. My VPS doesn’t have GRUB installed, so I suppose I’m going to try installing GRUB and setting my kernel to the default.
If anybody has any tips, it’ll be greatly appreciated.