Low End Virtual

HostMist – $7 512MB Xen VPS in Germany Exclusive Offer

HostMist Richard from HostMist has emailed me an exclusive offer for the LowEndBox readers, on their new Germany based Xen VPS plans. Use promo code LEBSLICEPRICE to get 50% off discount for two months (i.e. not recurring). Their standard pricing is already pretty good, which we posted 3 months ago. “Monsoon” for $7/month (direct order link), and it comes with

  • 512MB memory
  • 25GB storage
  • 500GB/month data transfer
  • Xen/SolusVM

Servers in Falkenstein, Germany so I guess it would be Hetzner. HostMist was founded in September 2008. The 50% off for 2 months discount is available to new customers only and expire in 2 weeks.

94 Comments

  1. Richard's avatar
    Richard

    Thank you for the post, LEB! We really appreciate it.

  2. peter's avatar
    peter

    is there any info about SWAP space? 512MB, but what the SWAP space if it is XEN?

    • LEA's avatar
      LowEndAdmin Author

      I think with SolusVM it’s usually 2x the physical memory. Although with Xen you can pretty much just create a swap file and then bang! More swap space!

      (Not recommended though)

      • Daniel @ LowEndTalk.com's avatar
        Daniel @ LowEndTalk.com

        So My Xen VPS with 10GB SWAP is a bad idea?

    • Richard's avatar
      Richard

      The Amount of SWAP equals the amount of dedicated RAM you get.

    • Richard's avatar
      Richard

      We always display the lowest monthly price on our website (starting at basically). If you choose to pay annually, you would only pay $6 USD per month.

  3. Craig's avatar
    Craig

    Good of ram size, mediocre on hdd space, but low on bw transfer limit,
    it would be nice if it’s at less 1tb of bw.
    it just my humble opinion 🙂

    • Yomero's avatar
      Yomero

      Almost any plan posted in this site is around that specs. I think is ok, and anyway isn’t a vps for p2p usage…

  4. razor's avatar
    razor

    First impressions of Hostmist VPS:
    location: Germany
    processor:
    4 core x IntelCore(TM)i7 930 @ 2.80GHz

    disk I/O:
    dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 12.8368 s, 83.6 MB/s

    network speed:
    1) wget ftp://ftp.ovh.net/test.bin — FRANCE
    –2011-01-26 04:47:48– ftp://ftp.ovh.net/test.bin
    Length: 104857600 (100M)

    100%[===================================================================================>] 104,857,600 333K/s in 5m 28s

    2011-01-26 04:53:16 (312 KB/s) – `test.bin’ saved [104857600]

    2) wget http://cachefly.cachefly.net/100mb.test
    –2011-01-26 04:55:19– http://cachefly.cachefly.net/100mb.test

    100%[===================================================================================>] 104,857,600 1023K/s in 1m 53s

    2011-01-26 04:57:13 (904 KB/s) – `100mb.test’ saved [104857600/104857600]

    unfortunately too low speed network 🙁
    maybe it’s just problem on my VPS

  5. Kasper Bergholt's avatar
    Kasper Bergholt

    @Razor — Nope, I’m experiencing the same thing. 200-300 kb/s during downloads of Nginx packages. If that’s the general throughput, the VPS is close to useless… A shame…

  6. Matthew Strohmeyer's avatar
    Matthew Strohmeyer

    Razor,
    We have not had any complaints about speed. Can you submit a ticket so that we can look into it for you?

  7. Matthew Strohmeyer's avatar
    Matthew Strohmeyer

    Alright the reason for that is because a bunch of you are working at the same time. Give it a few days or so and it should be back up to full speed. It’s the effect of having a sale and about 15 people sign up in one day.

  8. neil's avatar
    neil

    Host Mist speed has always been an issue, Matthew the owner now claims its because ” A BUNCH OF YOU WORKING AT SAME TIME”

    BULL CRAP!

    HOST MIST IS SCAM SO SLOW AND POOR SUPPORT

    • Richard's avatar
      Richard

      Dear Neil,

      Could you please provide me with information so that I can verify that you are / have been an customer?

    • Matthew Strohmeyer's avatar
      Matthew Strohmeyer

      Speed has never been an issue. In fact I can say this is pretty satisfactory for a full server of about 30 VPS clients.

      [root@crafting ~]# wget http://cachefly.cachefly.net/100mb.test
      --2011-01-26 21:31:04--  http://cachefly.cachefly.net/100mb.test
      Resolving cachefly.cachefly.net... 205.234.175.175
      Connecting to cachefly.cachefly.net|205.234.175.175|:80... connected.
      HTTP request sent, awaiting response... 200 OK
      Length: 104857600 (100M) [application/octet-stream]
      Saving to: `100mb.test'
      
      100%[======================================>] 104,857,600 10.7M/s   in 9.7s
      
      2011-01-26 21:31:15 (10.3 MB/s) - `100mb.test' saved [104857600/104857600]
      

      The new one is labeled below 🙂

    • Matthew Strohmeyer's avatar
      Matthew Strohmeyer

      Also, upon investigation there is no client named “Neil” in our billing system. Care to explain who you are?

  9. Kasper Bergholt's avatar
    Kasper Bergholt

    @Matthew Strohmeyer — Makes sense. Could you shed light on how many VPS accounts you keep on each server node? A quick calculation tells me it’s more than 15 if a signup burst means maxing out the allocated bandwidth.

  10. Richard's avatar
    Richard

    Dear Kasper,

    This entirely depends on the plans we sell. We place an average of 30 XEN VPS on each node. Even 2 VPS can utilize 100% of the port as we do not limit it but if we do see customers impacting others by utilizing over 80% of the port constantly we will limit that customer.

  11. Daniel @ LowEndTalk.com's avatar
    Daniel @ LowEndTalk.com

    HostMist swap. I have httpd installed on a basic CentOS install, and its using 500MB of RAM, and nothing big in top.

  12. Richard's avatar
    Richard

    Dear Daniel,

    That’s probably why SolusVM doesn’t show your current XEN VPS usage as pretty much every command which shows your memory usage shows that you are utilizing all of your memory.

    • Daniel @ LowEndTalk.com's avatar
      Daniel @ LowEndTalk.com

      Yeh, I checked if it was balooning. It wasn’t, it was actually a naughty httpd config which was in the CentOS repo. I just changed it and rebooted.

  13. Matthew Strohmeyer's avatar
    Matthew Strohmeyer

    Now try it…

    [root@anoth ~]# wget http://cachefly.cachefly.net/100mb.test
    --2011-01-27 05:25:18--  http://cachefly.cachefly.net/100mb.test
    Resolving cachefly.cachefly.net... 205.234.175.175
    Connecting to cachefly.cachefly.net|205.234.175.175|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 104857600 (100M) [application/octet-stream]
    Saving to: `100mb.test.1'
    
    100%[======================================>] 104,857,600 11.0M/s   in 9.1s
    
    2011-01-27 05:25:28 (11.0 MB/s) - `100mb.test.1' saved [104857600/104857600]
    

    That should do it 🙂

    • razor's avatar
      razor

      Indeed today, everything is ok.

      wget http://cachefly.cachefly.net/100mb.test
      --2011-01-27 15:17:11--  http://cachefly.cachefly.net/100mb.test
      Saving to: `100mb.test.5'
      100%[================================>] 104,857,600 10.9M/s   in 9.1s
      2011-01-27 15:17:21 (11.0 MB/s) - `100mb.test.5' saved [104857600/104857600]
      

      Excellent support and excellent performance servers!

  14. Kasper Bergholt's avatar
    Kasper Bergholt

    I can confirm Strohmeyers test. I’m getting 11.2 MB/s now. CPU ressources seem ample. IO/wait is good too. For 3.5, I’m a happy camper!

  15. fugoki's avatar
    fugoki
    Linux xxx.xxx.xxx 2.6.32-308-ec2 #16-Ubuntu SMP Thu Sep 16 15:25:39 UTC 2010 x86_64 GNU/Linux
    Ubuntu 10.10
    
    Welcome to Ubuntu!
     * Documentation:  https://help.ubuntu.com/
    Last login: Thu Jan 27 01:33:32 2011 from x.x.x.x
    root@xxx:~
    > cd /tmp
    root@xxx:/tmp
    > wget http://cachefly.cachefly.net/100mb.test
    --2011-01-27 17:47:33--  http://cachefly.cachefly.net/100mb.test
    Resolving cachefly.cachefly.net... 205.234.175.175
    Connecting to cachefly.cachefly.net|205.234.175.175|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 104857600 (100M) [application/octet-stream]
    Saving to: `100mb.test'
    
    100%[==============================================>] 104,857,600 11.1M/s   in 9.1s    
    
    2011-01-27 17:47:42 (11.0 MB/s) - `100mb.test' saved [104857600/104857600]
    

    I too hit the slow speeds upon initial sign up but that’s where I’m @ today.

    My order got flagged as fraud possibly since I forgot to change country from US to UK but this resolved in minutes & once I paid my vps was instantly online.

    Seems like a solid little box so far. (I dist-upgraded which is why ive got 10.10 not 10.04)

  16. Bjorn's avatar
    Bjorn

    Just bought the monsoon package. Server was up and running exactly 1 minute after I payed via paypal..
    If this is any reference to what I can expect from them I’m already a happy customer.

  17. Richard's avatar
    Richard

    We are almost out of stock so grab your XEN VPS before it’s too late. It may take us a few weeks to get some stock again!

  18. Handsome Pat's avatar
    Handsome Pat

    It was fun while it lasted: I can confirm that they are out.

    I was provisioned one @ 36hrs ago. It was snappy. The provisioning was almost instantaneous, but of course you have to wait for it to boot.

    I updated it and was locking it down when I had to go to work, so I shut it down. Came home 8 hours later, and it wouldn’t start. I figured they were doing maintenance. When I woke up in another 8 hours my vps was gone.

    I did get a timely refund though.

    • Richard's avatar
      Richard

      Dear Pat,

      We do apologize for that. We are unsure what happened but SolusVM started messing up during the provisioning and suddenly put customers on full nodes. If you do experience something like this, please contact us immediately so we can fix it. We fixed the problem which was causing it and we do hope that you don’t mind us turning down business overall. We are currently out of stock but if you would like to try us again when we have stock again, I would like to offer you one free month for the inconvenience.

  19. dave's avatar
    dave

    do you support pptp vpn servers ?

    • Richard's avatar
      Richard

      Sure, we have a few customers who installed this already.

  20. Richard's avatar
    Richard

    We currently have really limited stock again and we will have way more stock tomorrow night so if you still want to grab one of these, tomorrow night is the day!

  21. Fernando's avatar
    Fernando

    Awesome site. Great to have offers like this given out to readers.

  22. Jim MacKenzie's avatar
    Jim MacKenzie

    Do these VPSes receive IPv6 IPs in addition to IPv4?

  23. Richard's avatar
    Richard

    Dear Jim,

    We do have an native IPv6 connection to the nodes but the XEN domU cannot use it currently. The network we use is routed and the XEN PV currently does not support proxy ndp which would enable us to offer IPv6 to customers.

    In short, no but we are working on it.

  24. Kasper Bergholt's avatar
    Kasper Bergholt

    //Does ballooning equal overselling?//

    About ten minutes ago I received the following reboot notification from Hostmist. A node reboot from time to time is ok to me if there’s satisfactory explanation as to why it has to be done.

    Does the following explation make sense to you? It doesn’t to me, but I’d be happy to be mistaken —

    “Xen recently introduced an balloon driver which basically balloons out if an VPS needs to be started to gather resources. The fact is that they wanted to improve performance on boot with this and ended up making performance worse as VPS start locking up or it freezes the VPS while it’s running. There was an patch available,which we applied earlier and now they finally released an new kernel build which we will apply tonight to finally get this problem out of the world. In order to apply the new kernel we will need to reboot the node again. As much as we hate to reboot the node, it’s definitely necessary to get this new kernel working in order to proceed with normal operations.

    The reboot will be happening tonight at 6 pm EST (GMT-5) and should only take 5 minutes. We cannot guarantee that this will fix everything but we are confident enough to say that there is nothing worse then the current kernel. A few other nodes have been migrated to this kernel and we did not have any problems yet.”

    • Josef's avatar
      Josef

      http://www.lowendbox.com/blog/how-to-tell-your-xen-vps-is-overselling-memory/

      It depends, if it’s being used to give you above your promised amount (they suggest it’s to allow your VPS extra memory during startup), then it’s not overselling, it’s underselling.

      But if ‘free’ only reports your promised amount as the total available, then possibly. If it only shows the standard total and also reports more in use than your processes are actually using, then it sounds more likely still.

      Either way, a fix for the driver sounds like a good thing.

  25. Richard's avatar
    Richard

    I apologize for the delay, we have been caught up with fixing the problem above. This is how the balloon driver works:

    Usually the Dom0 (hostnode) gets all the memory allocated and then dynamically allocates the memory to DomU as needed. We limited this behavior by setting dom0_mem in the grub configuration file which basically gives the Dom0 an fixed amount of RAM and the rest is free to be allocated to the DomU. Now the balloon driver also allocates extra memory on our nodes while the DomU is booting. So whenever you boot an DomU that DomU temporarily get’s additional memory to boot without any trouble or complications. The problem we were having is that the memory which got allocated to the DomU while booting didn’t get freed again afterwards. So the DomU still had more RAM then allocated and didn’t give it back to the Dom0 to be allocated to other VPS who needed it. So if we still have around 3GB of RAM free, it won’t take long until that is used up by people rebooting their VPS. I think you guys know where Im going so no need to explain further.

    If you know SolusVM then you would know that SolusVM doesn’t allow overselling on xen. In fact we even leave up to 3 GB of RAM unallocated for people wanting to upgrade so that they don’t need to be moved to another node.

    • Daniel @ LowEndTalk's avatar
      Daniel @ LowEndTalk

      You couldn’t upgrade some of my VPSs 🙁

      • Richard's avatar
        Richard

        Im sorry but that’s how vps hosting works. We can’t keep all resources free on all servers. We will probably get new stock soon, we are still figthing for IPv4 addresses as hetzner seems to run low on them.

  26. paul's avatar
    paul

    I have had a server there for at least a week, despite the site saying the incorrect price, I did pay the rest.

    My monitors have shown up 3-4 outages, which I would class as minor, but still outages.
    I hope this does not keep up.

    • Matthew Strohmeyer's avatar
      Matthew Strohmeyer

      Those outages are related to the balloon driver / kernel upgrade to fix that. There won’t be any needs for a reboot for a long while.

      As for site saying the incorrect price, it’s currently listed as the lowest price. The newer site will have everything listed out for each term prior to the order links.

  27. Richard's avatar
    Richard

    We kept running out of stock and we should be able to provision plenty of XEN VPS again now. We apologize for the wait, guys, but we wanted to make sure that we have enough stock for the next few days.

    • Harbinger's avatar
      Harbinger

      Do you offer centOS 32bit? I cannot see it on the order form

  28. Richard's avatar
    Richard

    Dear Harbinger,

    We used to offer 32 bit OS templates but we had a lot of problems with those as the Hostnode is running on 64bit. Im afraid that we only offer 64bit OS templates now.

  29. Koen's avatar
    Koen

    Just tried to get one, but after entering the promo code, the website said:

    The promotion code entered has expired

    Is this promotion officially closed now?

    • Koen's avatar
      Koen

      Opened a ticket on their site and got an almost instant reply stating that the code shouldn’t have expired so soon. After that, the promo code was indeed accepted.

  30. Richard's avatar
    Richard

    This offer will be extended until 28th of Feburary, 2011. We were out of stock half the time so we decided to extend this promotion for all LEB readers.

  31. Petar's avatar
    Petar

    Alright here’s my review of HostMist’s service:

    Although I was a total n00b with linux (the only command I actually new was su :D) I bought and started setting up my VPS. At first I tried a lot of Linxu distributions, until finally I managed to setup my VPS with nginx (instead of the tons of memory eating apache), php+fastcgi, mysql and vsftpd and now I’m having successfully setuped and working wordpress blog on CentOs 5 x64. Now the only problem that I had to contact the support was that once after I tried to reinstall my Centos 5 x86 (while they still offered it) something went wrong and the installation process failed. Richard was kind enough to fix the issue by telling me that there have been problems with x86 versions and I shouldn’t have had them as an option in the control panel. So he installed a x64 version and everytjing was fine (I didn’t want to touch anything, cause I was totally freaked out that I may have killed my vps :D). As a result I educated myself a lot about linux, vpses, memory problems, comamnds, hosting setup, etc. For 3.5$/month (I’m using XEN in Falkenstein) it’s more that a great offer! Thank you HostMist, thank you Richard, keep up the good work!

  32. Richard's avatar
    Richard

    Thank you for the kind words. We definitely appreciate that.

  33. Bob's avatar
    Bob

    Hum, sounds great…

    Any test IP?

    As it’s running Xen, would it be possible to have FreeBSD instead of a GNU/Linux distro?

    Thanks!

    🙂

  34. Richard's avatar
    Richard

    Hey Bob,

    We don’t officially have this template available but we could try to create one. It would be nice if you could send us an e-mail to sales [at] hostmist.com and include the FreeBSD version you would like. We will then try to create one and report back as soon as we have results.

    • Bob's avatar
      Bob

      Well, if you try i guess that other LEB readers could be interested by this offer (there aren’t that much *BSD providers around there…

      Might be pretty easy though 🙂

  35. zar's avatar
    zar

    Can anyone comment on the latency of these boxes – particularly from Asia Pacific, Australia etc? Is there a test box one can ping?

    Thanks.

      • Joe's avatar
        Joe

        Thanks for the information xue 🙂

        Are you happy with your VPS? Good speeds & reliability?

        Thx

        • xue's avatar
          xue

          >Are you happy with your VPS?
          yep!

  36. Joe's avatar
    Joe

    When will the coupon expire?

  37. Richard's avatar
    Richard

    Dear Joe,

    The coupon will expire on the 28th of February.

    • Joe's avatar
      Joe

      Ok, nice.

      And how many cores can we use?

      Thanks!

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *