LowEndBox

Hosting Websites on Bare Minimum VPS/Dedicated Servers

i-83 – 100Mbps Unmetered OpenVZ NAT VPS starting at £2.50/year + Resource Pools – in USA, EU, and Asia

Tags: , , , , , , , , , , , Date/Time: March 2, 2016 @ 9:32 pm, by Ishaq
Info: i-83 expects their Indian location to open up soon, and this offer should apply to that location too.

We received an offer from Joe over at QuadHost Ltd, who are the parent company of i-83.net. This is the first time we’re featuring i-83 here, but they’re known for their NAT offerings on our forum, LowEndTalk. They’ve added a few new locations and include DDoS protection in some locations. The parent company QuadHost Ltd is registered in London, with company number GB #09661301.

The hostnodes feature E3 or i5 processors, with 16GB or 32GB of RAM, along with 1TB or 2TB of disk space configured in RAID 1 or 10. They are connected by either a 100Mbps or 1Gbps port (location dependant). Each service comes with 20 ports + an SSH port on IPv4, along with a /56 subnet, /64 subnet, or single IPv6 addresses depending on the location. The resource pools feature unlimited NAT ports, provided it is following their FUP.

They offer PayPal and Bitcoin as payment methods. Before ordering, please ensure you read their policies, which are available here.

IPv4 NAT + IPv6 OpenVZ Based – VPS Offers

London, United Kingdom:

LDN-128
Unmanaged
128MB DDR3 RAM
128MB SWAP
1 Intel E3 vCPU
5GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
/64 Block IPv6
£2.50/year ($3.52 USD)
Order Link
LDN-256
Unmanaged
256MB DDR3 RAM
256MB SWAP
1 Intel E3 vCPU
15GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
/64 Block IPv6
£4.50/year ($6.32 USD)
Order Link

Roubaix, France:

RBX-128
Unmanaged
128MB DDR3 RAM
128MB SWAP
1 Intel E3 vCPU
5GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
10 IPv6
£2.50/year ($3.52 USD)
Order Link
RBX-256
Unmanaged
256MB DDR3 RAM
256MB SWAP
1 Intel E3 vCPU
15GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
10 IPv6
£4.50/year ($6.32 USD)
Order Link

Varna, Bulgaria:

VAR-128
Unmanaged
128MB DDR3 RAM
128MB SWAP
1 Intel i5 vCPU
5GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
5 IPv6
£2.50/year ($3.52 USD)
Order Link
VAR-256
Unmanaged
256MB DDR3 RAM
256MB SWAP
1 Intel i5 vCPU
10GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
5 IPv6
£4.50/year ($6.32 USD)
Order Link

Falkenstein, Germany:

FLK-128
Unmanaged
128MB DDR3 RAM
128MB SWAP
1 Intel Sandybridge vCPU
5GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
5 IPv6
£2.50/year ($3.52 USD)
Order Link
FLK-256
Unmanaged
256MB DDR3 RAM
256MB SWAP
1 Intel Sandybridge vCPU
10GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
10 IPv6
£4.50/year ($6.32 USD)
Order Link

North Carolina, USA:

NC-128
Unmanaged
128MB DDR3 RAM
128MB SWAP
1 Intel Xeon vCPU
5GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
/64 IPv6
£2.50/year ($3.52 USD)
Order Link
NC-256
Unmanaged
256MB DDR3 RAM
256MB SWAP
1 Intel Xeon vCPU
15GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
/64 IPv6
£4.50/year ($6.32 USD)
Order Link

Singapore:

SG-128
Unmanaged
128MB DDR3 RAM
128MB SWAP
1 Intel E3 vCPU
5GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
/64 IPv6
£2.50/year ($3.52 USD)
Order Link
SG-256
Unmanaged
256MB DDR3 RAM
256MB SWAP
1 Intel E3 vCPU
15GB RAID Storage
Unmetered @ 100Mbps
1 Shared IPv4 (20+SSH Ports)
/64 IPv6
£4.50/year ($6.32 USD)
Order Link

IPv4 NAT + IPv6 OpenVZ Based – Resource Pool/Bundle Offers

OpenVZ Resource Bundle #1
3 vCPU total
1 vCPU per VM
512MB RAM
35GB RAID Disk
Unmetered Ports
3 Instances
Shared IPv4 with IPv6
£10 (~$14 USD) annually – Order Link

OpenVZ Resource Bundle #2
8 vCPU total
2 vCPU per VM
1024MB RAM
80GB RAID Disk
Unmetered Ports
6 Instances
Shared IPv4 with IPv6
£17.50 (~$25 USD) annually – Order Link

OpenVZ Resource Bundle #3
10 vCPU total
3 vCPU per VM
2048MB RAM
2048MB SWAP
175GB RAID Disk
Unmetered Ports
10 Instances
Shared IPv4 with IPv6
£32.50 (~$46 USD) annually – Order Link

Locations & Test Information

OVH – Roubaix, France
Test IPv4: 5.196.36.46
Test IPv6: 2001:41d0:2:599c:0000:0000:1322:c477
http://lg-rbx-fr.quadhost.net/

Telecoms Ltd – Varna, Bulgaria
Test IPv4: 80.95.29.222
Test IPv6: 2a02:7900:1:2835::3
http://lg-var-bg.quadhost.net/

Virtus – London, UK
Test IPv4: 185.120.20.244
Test IPv6: 2a06:8ec0:0000:0006:0000:0000:0000:0001
http://lg-ldn-uk.quadhost.net/

CentriLogic – Lenoir, NC
Test IPv4: 104.171.123.114
Test IPv6: 2607:5600:01b8:008f:0000:0000:0000:0001
http://lg-nc-us.quadhost.net

Hetzner – Falkenstein, DE
Test IPv4: 136.243.214.125
Test IPv6: 2a01:04f8:0191:3358::0000
http://lg-flk-de.quadhost.net

AXGN – Singapore
Test IPv4: 111.221.44.151
Test IPv6: 2400:fb80:0000:0019:0000:0000:0000:0001
http://lg-tai-sg.quadhost.net

72 Comments

  1. Exim:

    OpenVPN allowed?

    March 3, 2016 @ 6:58 am | Reply
  2. Anna:

    The best lowendspirit NAT IPv4 company. Thanks Joe! :))))

    March 3, 2016 @ 9:35 am | Reply
    • c:

      better than lowendspirit itself?

      March 4, 2016 @ 12:30 pm | Reply
    • QH_Joe:

      Thanks for the feedback!

      March 4, 2016 @ 8:10 pm | Reply
  3. Lucas:

    This kind of cheap moneywasters :)

    March 3, 2016 @ 9:51 am | Reply
  4. Dedicated ip possible?

    March 3, 2016 @ 10:34 am | Reply
  5. David:

    I can definitely recommend them. A bit more expensive compared to some other Lowendspirit offers but from my experience their servers run very solid and reliable. I had very few downtimes so far. Of course you won’t run any complex applications on a LES box but it’s nice to know you can always ssh into it whenever you need it for some troubleshooting.

    March 3, 2016 @ 11:05 am | Reply
    • QH_Joe:

      Thanks for the feedback!

      March 4, 2016 @ 8:11 pm | Reply
  6. StarGazer:

    any reverse proxy for ipv4 ports?

    March 3, 2016 @ 12:12 pm | Reply
    • itgods:

      Via Cloudflare?

      March 3, 2016 @ 1:42 pm | Reply
      • 52edc:

        Hello

        Is there any manual or step by step how to showing how to set clouflare and quadhost to work together using ipv6 ?

        have spend a few hours but no result :(

        Thanks.

        June 7, 2016 @ 10:05 pm | Reply
  7. Saint:

    Are the offshore locations DMCA non-compliant?

    March 3, 2016 @ 10:48 pm | Reply
    • Lucas:

      Everything depends company location, not a node VPS physical location with them

      March 4, 2016 @ 7:00 pm | Reply
  8. very nice offer

    March 4, 2016 @ 12:07 am | Reply
    • c:

      lol nasa yuga ka lang kanina ha

      March 4, 2016 @ 12:28 pm | Reply
  9. Ordered! So far so good. This is my first NAT box, but easy to set up.

    March 4, 2016 @ 2:32 am | Reply
  10. Can we use this to watch Hulu/Netflix?

    March 4, 2016 @ 9:33 am | Reply
    • farcraw98:

      IPV4 doesn’t work for me, but got it working via IPV6.

      March 8, 2016 @ 4:00 pm | Reply
      • Ronnie:

        Would you be able to share how you managed to do this?

        April 5, 2016 @ 9:35 pm | Reply
      • Brian:

        I am very interested in how you did this with IPV6 :) Do you have a link/guide?

        April 8, 2016 @ 8:00 pm | Reply
  11. Ron:

    I recently have the SG-128, the problem is, system have reboots almost everyday?Anybody have the same experience?

    March 4, 2016 @ 12:08 pm | Reply
    • QH_Joe:

      This certainly isn’t the case – uptime can be checked anytime on our status page on our main website.

      If your instance appears to be unstable feel free to open a ticket and we can take a look.

      March 4, 2016 @ 8:13 pm | Reply
      • John C.:

        It absolutely is the case. Your status page is a farce. In reality the down time and instability is awful and constant. You know a company is incompetent when they’re unaware of their own downtime issues and call you a liar when a customer points them out.

        November 5, 2016 @ 6:55 am | Reply
  12. null:

    Got a SC-128 works pretty great! Kinda slow on the first day, I’m assuming cuz they were flooded with new orders, but all clear ever since.

    March 5, 2016 @ 8:21 pm | Reply
  13. Tom:

    I would recommend them, the reply from them is quick, which is different from the lowendspirit series

    March 6, 2016 @ 12:20 am | Reply
  14. Al:

    Can we use this to watch BBC iplayer?

    March 6, 2016 @ 12:50 am | Reply
  15. How soon will the Bulgaria stock be available? Also, how ‘soon’ is India expected? :)

    March 6, 2016 @ 11:07 pm | Reply
  16. Anna:

    Where’s India? :)

    March 6, 2016 @ 11:37 pm | Reply
  17. Malaga:

    Can these be used as seed boxes?

    March 7, 2016 @ 5:41 am | Reply
  18. John:

    some one can tell me how to install openvpn on this vps ?

    March 10, 2016 @ 5:33 am | Reply
  19. cnug:

    Is emule traffic allowed at the Bulgaria node? I am not planning to run emule on the node. Rather, I want to run openvpn, then tunnel my emule traffic to the server. My local ISP blocks emule traffic.

    March 11, 2016 @ 8:12 am | Reply
  20. Shot2:

    I read “along with a /56 subnet”

    Hmmm… where?

    March 11, 2016 @ 11:50 pm | Reply
  21. Henry:

    can use it to host website via cloudflare?

    March 14, 2016 @ 3:07 pm | Reply
    • Yes! You can host website via cloudflare with IPv6.

      March 16, 2016 @ 3:32 pm | Reply
  22. Henry:

    How can use it to host website?

    March 14, 2016 @ 3:08 pm | Reply
    • Kripul:

      Try to search dual stacked apache2.

      April 11, 2016 @ 2:17 am | Reply
  23. Henrry:

    How can I host a website? Please help

    March 14, 2016 @ 3:32 pm | Reply
    • Just setup a website like you always do, then modify the listen port in your webserver conf file, the port assigned from them instead of default port 80.

      Or you can use cloudflare, just pointing to your dedicated ipv6 address.

      March 16, 2016 @ 5:21 pm | Reply
  24. Henry:

    Sorry, When I post comments above, browser show error 500, this morning I see 3 posts.

    March 15, 2016 @ 1:56 am | Reply
  25. Neps:

    I wanted to try SG location but routing is pretty bad; from a country that’s right beside SG traffic gets routed through all sorts of locations.

    March 16, 2016 @ 11:03 am | Reply
  26. Henry:

    Can anyone help me?

    March 16, 2016 @ 11:06 am | Reply
    • Just setup a website like you always do, then modify the listen port in your webserver conf file, the port assigned from them instead of default port 80.

      Or you can use cloudflare, just pointing to your dedicated ipv6 address.

      March 16, 2016 @ 5:24 pm | Reply
    • Just setup a website like you always do, then modify the listen port in your webserver conf file, the port assigned from them instead of default port 80.

      Or you can use cloudflare, just pointing to your dedicated ipv6 address.

      WTF?! I post the comment for three times and always got 500 error?! This is my last try….

      March 16, 2016 @ 5:25 pm | Reply
    • Just setup a website like you always do, then modify the listen port in your webserver conf file, the port assigned from them instead of default port 80.

      Or you can use cloudflare, just pointing to your dedicated ipv6 address.

      WTF?! I post the comment for four times and always got 500 error?! This is my last try….

      March 16, 2016 @ 5:25 pm | Reply
      • Henry:

        Thank you very much!
        I have set up a record AAAA pointing to ipv6 and I turn on ipv6 compatibility but not success.
        I have also install httpd on server and check port 80 listening.
        What else should I do?

        March 17, 2016 @ 8:51 am | Reply
  27. try to check your log? any error info or access info?

    March 19, 2016 @ 3:55 am | Reply
  28. Just looking for something to kick off wget cron jobs that run tasks on other Web hosting servers. Low cpu, low io, low memory, low disk needs. Would this work for that?

    March 19, 2016 @ 11:47 pm | Reply
  29. mark:

    It used to connect directly from China to SG in the first five days after I ord the NAT VPS, however the route been changed to US then back to SG… That makes the link quality terrible.

    March 20, 2016 @ 8:40 am | Reply
  30. iman:

    vpn proxy allowed?

    March 22, 2016 @ 9:07 pm | Reply
  31. iman:

    vpn proxy allowed??

    March 22, 2016 @ 9:11 pm | Reply
  32. Aizat:

    Hi, can this be used to browse on autosurf like Hitleap and Otohits?

    I am not really sure about NAT. It uses a shared IPv4 right? Autosurf usually needs its surfers to have a unique IP.

    Thanks.

    March 26, 2016 @ 3:31 am | Reply
  33. mmm:

    Anyone has processes that consume around 11% of the cpu? They say on the AUP that I can’t use more than 10% or they terminate the account, but I’m not sure exactly how they measure it.

    March 26, 2016 @ 2:32 pm | Reply
  34. kash:

    I’ve been using them for a week and the experience has been terrible. My server all of the sudden shuts down, also the UI is misleading. Instead of helping the user and specifying and IP and a PORT for ssh connections they provide you with instructions via email or the FAQ on how to generate your host+port. ALL of my servers on NC are unreachable, only using the serial console am I able to get in. Anyways, it was tempting for the price but I wouldn’t recommend them.

    March 26, 2016 @ 3:13 pm | Reply
    • John C.:

      +1. Not even worth the 2.50. The down time and constant crashes make it unusable for almost anything

      November 5, 2016 @ 6:57 am | Reply
  35. Jonathan:

    Servers are fast and speeds are good, but I don’t know how to work with the NAT’d addressing, so I requested my service be canceled. If it doesn’t go through I’ll probably just use it as a small SFTP server to store things.

    April 2, 2016 @ 8:28 pm | Reply
  36. Mayur:

    Recently they have launched their India Location.DEL-128 & DEL-256
    I was able to get one and conduct the speedtest.
    Result: http://www.speedtest.net/result/5274681027.png

    root@in:~# cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 60
    model name : Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz
    stepping : 3
    microcode : 28
    cpu MHz : 3299.941
    cache size : 8192 KB
    physical id : 0
    siblings : 8
    core id : 0
    cpu cores : 4
    apicid : 0
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf cpuid_faulting pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase bmi1 avx2 smep bmi2 erms invpcid xsaveopt
    bogomips : 6599.88
    clflush size : 64
    cache_alignment : 64
    address sizes : 39 bits physical, 48 bits virtual
    power management:

    April 24, 2016 @ 9:20 am | Reply
  37. Mayur:

    Recently they have launched their INDIA location.
    Speedtest Results: http://www.speedtest.net/result/5274681027.png
    CPU: model name : Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz

    April 24, 2016 @ 9:23 am | Reply
  38. bitdumper:

    guys is it shared hosting or shared vps
    during checkout i see shared hosting
    i am confused

    May 8, 2016 @ 3:51 pm | Reply
  39. Piyush:

    New Delhi no more available ??

    June 1, 2016 @ 2:55 pm | Reply
  40. Rafael:

    Brazil in the future plan?

    July 8, 2016 @ 1:14 am | Reply
  41. Sid:

    I have started using their services, and i must say they are amazing bunch of people. Support is absolutely amazing. only problems is that they dont give a shared ip, it is subdomain pointing to server with ports forwarded. till now, i am facing no problems. A+++ service.

    Note- They only give NAT services for this plan. You better know how it works.

    July 26, 2016 @ 8:06 am | Reply
  42. g4m3r:

    The resource pool order links aren’t working.
    Is the offer available anymore?

    September 16, 2016 @ 4:43 pm | Reply
  43. cu:

    Avoid these assholes at all possible. They rent a few cheap servers and put hundreds of customers on them. The VPS is the slowest I have used. And they change your IP address without any communication. They should not stay in business…

    September 19, 2016 @ 6:10 am | Reply
  44. customer:

    Avoid these a$$holes at all possible. They rent a few cheap servers and put hundreds of customers on them. The VPS is the slowest I have used. And they change your IP address without any communication. They should not stay in business…

    September 19, 2016 @ 6:11 am | Reply
  45. asdflkjdf:

    Agree. These fucking scumbags have extended service outages every week and I/O is the worst I have seen…They even change your IP address without any communication.

    October 6, 2016 @ 10:09 am | Reply
  46. Tamwyn:

    Also facing issues. Quite a few downtimes in the flk location. The server has been more or less unavailable for the second half of last september and the first half od october. Though there was some communication it still wasn’t really satisfying in getting to know what is going on and how long it will take.
    Now since the 14th of March all Servers in flk-Germany are down. Everything communicated from QuadHost so far (6 days later: The server is down, we are working with Hetzner to resolve the issue). Nothing else. NOTHING.
    No email, no apologies, just, we are working on it. Definitely not worth a recommend.

    March 20, 2017 @ 11:44 pm | Reply
  47. martin:

    Yeah and now they’ll remove the flk-location and relocate all accounts to london. As happend to me. And london is .. down since 2 Days.

    May 1, 2017 @ 9:00 pm | Reply
  48. Akshay:

    I paid for a NAT based VPS and I have not been provided with any. Been waiting up since 24 hours with no reply to any support ticket. Worst kind of VPS service provider with no assistance or information being provided on whats going to happen to the server.

    May 14, 2017 @ 5:56 am | Reply

Leave a Reply

Some notes on commenting on LowEndBox:

  • Do not use LowEndBox for support issues. Go to your hosting provider and issue a ticket there. Coming here saying "my VPS is down, what do I do?!" will only have your comments removed.
  • Akismet is used for spam detection. Quoting webhostingtalk.com URL seems to get binned consistently here, but I do peek into the spam box frequently to publish those comments.
  • Use <pre>...</pre> to quote the output from your terminal/console, or consider using a pastebin service.

Your email address will not be published. Required fields are marked *