Low End Virtual

Spacerich – $2.99 256MB OpenVZ VPS (5 Year Anniversary Promotion)

Spacerich 5 year birthday promotion Vinyas from Spacerich emailed me about their current 5th Year Anniversary promotion for the LowEndBox readers.

The Event

On August 12, 2010, Spacerich Networks will celebrate its successful 5th year anniversary. On behalf of all the staff, we would like to thank our loyal customers for their support and dedication over these past years.

Thanks Due

To reward those who have helped us get to where we are today, we have randomly selected 50 customers from our active base. These customers will receive a complimentary upgrade and an additional 1 year of web hosting at absolutely no cost. Selected customers are informed via e-mail.

There is also a special coupon code Lowly25 which gives you 25% recurring discount for any VPS plans on monthly billing. That means their “Canis” plan in either Chicago or Germany will be $2.99/month with the following spec:

  • 256MB guaranteed/384MB burstable memory
  • 25GB storage
  • 400GB/month outbound data/month with unmetered inbound data
  • OpenVZ/SolusVM

Unmetered inbound & large storage would make it a good plan for backup servers. Too bad the US node is already out of order, although the next plan up, Carina at $5.24/month, is still available.

119 Comments

  1. Asim Zeeshan's avatar
    Asim Zeeshan

    @Jackk you are lucky mate your VPS is working perfectly alright! Tried to sort this out with support but Alas!

    by the way, my QuickWeb $3.75/mo 128MB VPS gives me more speed, I/O and better network connection.

  2. Asim Zeeshan's avatar
    Asim Zeeshan

    @Jackk no tests, but this is my guess that I/O is low bcoz as I said earlier “Installing an OS from SolusVM and doing a ‘nano somefile’ or ‘crontab -e’ ” is giving me a lag, usually 5sec-15sec and sometimes even half a min.

  3. Jackk's avatar
    Jackk

    An OS re-install from SolusVM usually takes around a minute for me depending on how fast the current system takes to shut down. If something won’t shut down on the current system it can take around 3 or 4 minutes to re-install.

    Jack.

  4. Asim Zeeshan's avatar
    Asim Zeeshan

    @Jackk I gave it more then 18 hrs to settle down but still same results. The VPS was just not working for me. Tried support but invain, they did ask me to reboot it once (probably they changed io priority) and things got better a little but still the lag 🙁

  5. Susann's avatar
    Susann

    so many comments. i got vps since april and I think their support is patient in answering. When I got the err I asked support to increase prio and i changed to debian. all good after that. hope you find answer soon.

  6. rio's avatar
    rio

    iplan use for VPN , are this allowed?

  7. Jackk's avatar
    Jackk

    @rio – I guess so – They allow tun/tap enabled.

  8. Robin's avatar
    Robin

    How many hours give to your client to resolve any abuse related matter? I believe any other host provide time “24hours” where as you provide “2hours” only and with 50$ late response charge as well.

    But I want to ask, if the local time is not matched with you and if the client check that at morning will you going to charge him 50$ instantly. I hope you will increase the time like other host with at least 24 hours. Even burst.net provide 24 hours as well…

  9. Robin's avatar
    Robin

    @ Asim on my node I dont face any I/O, I found that it is faster. They provide good service to end-user.

    @ Susann hi, I also have 1 dedi myself, what is prio, never heard that. Could you please tell us more about prio?

  10. Spacerich's avatar
    Spacerich

    Robin,

    Time given to solve the abuse complaint is directly related to the nature of the complaint. We offer 24hr-36hrs standard time for unsolicited E-mail complaints. 12-24hr for Copyright notices. Much less for phishing scam, network attack and related complaints and zero if the complaint is very critical.

    Charging $50 is to encourage customers to act in timely manner or at least respond to the complaint. The charge can be removed upon successful complaint resolution.

    Cheers.

  11. Densets's avatar
    Densets

    Coupon doenst work anymore.

  12. Densets's avatar
    Densets

    my bad, it does work. =p

  13. Mike's avatar
    Mike

    I’m seeing some moderately poor i/o performance in Chicago as well, but it’s not horrible… yet. (Somewhat frequent load of 0.1 – 0.3 just from iowait. Basically nothing running; only using 140MB of RAM.) If it gets worse, or becomes consistent, that could be a problem, but for now I can put up with it. Hey, it’s $3 a month…

  14. Jackk's avatar
    Jackk

    static:~# dd if=/dev/zero of=test bs=64k count=16k; sync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 1.66642 s, 644 MB/s
    static:~#

    I ran this on my SpaceRich VPS in Hezter, DE – Cube node.

  15. LEA's avatar
    LowEndAdmin Author

    A note on using `dd` command to test IO — don’t trust the read out from `dd` itself, but actually time the entire operation including sync! (which might not work well under VE)

  16. Mike's avatar
    Mike

    Yeah, the heck with dd.

    [root@foo ~]# time w
    11:01:37 up 22:46, 1 user, load average: 1.44, 0.61, 0.27
    USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
    root pts/0 foo-7.foo.foo.foo 01:05 4.00s 0.21s 0.21s -bash

    real 0m4.362s
    user 0m0.001s
    sys 0m0.003s
    [root@foo ~]#

    On one of their Chicago nodes. Note that the load is entirely iowait, as the VPS wasn’t doing anything. Also note that the time was just after the hour, which is when things tend to bog down. (Somebody’s backup script thrashing the disk?)

    (For anyone who’s following along at home… that’s the command ‘w’ taking 4.3 seconds to run…)

  17. Omio's avatar
    Omio

    Their Chicago server, filled up. No available slot 🙁

  18. Mike's avatar
    Mike

    My VPS with them in Chicago continues to suffer really, really painful iowait, and anything that involves disk access is cripplingly slow. My VPS with them in Seattle, on the other hand, runs beautifully.

    While I’d prefer both VPSes ran smoothly, if one had to be slow I’d prefer Seattle. Oh, well. Maybe they’ll eventually figure out who’s mauling the disks in Chicago and boot them…

  19. Ozib's avatar
    Ozib

    It seems spacerich oversold their chicago node. Thats why poor I/O issue has been made really?!

  20. Spacerich's avatar
    Spacerich

    We have had H/W RAID problems on one of the Chicago nodes. And since last week, we have started moving customers from this problematic node to a much stable one. Other nodes have at least 200 days of uptime. Less than 5% of our clientele is affected by this node. If you are affected open us a ticket and provide the logs, and we will provide the resolution or move you out. Else stop making false half-knowledge assumptions.
    Regarding I/O on DE nodes: We have received complaints from none, but from one who failed to provide sufficient logs to investigate. Cannot blame on anything.

    In total, we have received only about 3 tickets regarding I/O problems till date, others seemed to have zero problems. Informing us with proper information (only) via ticket – helps.

    Cheers.

  21. Asim Zeeshan's avatar
    Asim Zeeshan

    > We have received complaints from none, but from one who failed to provide sufficient logs to investigate. Cannot blame on anything.

    You are referring to me, right? well I did provide what you asked for and what did I get? NOTHING! Now stop covering your slow I/O with an official statement.

    Oh and I finally made up my mind to try your Seattle node which someone from here said had good I/O and I also had a ticket #309668 logged with support. After this customer-bashing, forget it.

    I have good judgement in saying that your VPS has low I/O because I have 9 VPSes from different providers. Even my 80GB outperforms your 256MB VPS.

    @LEA I know this is not support forum but I want to make this clear to the community why I cancelled my VPS within 24 hours of payment and a support ticket.

  22. Jackk's avatar
    Jackk

    Well I am still very happy with their service – I get very fast speeds on their DE node (Cube).

  23. firmy's avatar
    firmy

    Resold there 42nd vps. No such problem. Happy with Spacerich too…

  24. Asim Zeeshan's avatar
    Asim Zeeshan

    I am on DE node CUBE, max speed (networking download) is 1.2mb/sec (10mbps). I dont complain about the network speed but the I/O itself.

  25. Jackk's avatar
    Jackk

    @Asim – Are you on the unmetered bandwidth plan? They have a maximum download speed of 10Mbps on this plan.

    Jack xD

  26. Asim Zeeshan's avatar
    Asim Zeeshan

    @Jackk as I said earlier, 10mbps is enough for me, dont need more. I just cant live with slow file access and I/O waits

  27. Jackk's avatar
    Jackk

    @Asim – Do you currently have a VPS with them? If so, run this and post the results here.

    dd if=/dev/zero of=test bs=64k count=16k; sync

  28. KLIKLI's avatar
    KLIKLI

    For a more accurate result it would be recording the time taken of the command above as sync consume time as well.

  29. Asim Zeeshan's avatar
    Asim Zeeshan
    root@spacerich:~# dd if=/dev/zero of=test bs=64k count=16k; sync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 1.52881 s, 702 MB/s
    root@spacerich:~#
    

    The actual test took 47 second on a VPS tht is running NOTHING at the moment

  30. KLIKLI's avatar
    KLIKLI

    47 seconds is actually quite good for budget VPSes, BurstNET VPS take >1.5 min for this and >2 min for ThrustVPS

  31. Asim Zeeshan's avatar
    Asim Zeeshan
    root@nagios:~# dd if=/dev/zero of=test bs=64k count=16k; sync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 9.34991 s, 115 MB/s
    root@nagios:~#
    

    Took just 9 seconds. Its a 128MB VPS from QuickWeb

    root@nagios:~# free -m
                 total       used       free     shared    buffers     cached
    Mem:           147        144          2          0         15         53
    -/+ buffers/cache:         75         72
    Swap:          255         18        237
    root@nagios:~#
    

    here is a ps aux output from the same VPS

    root@nagios:~# ps aux
    USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
    root         1  0.0  0.7  23704  1136 ?        Ss   Aug15   0:02 /sbin/init
    root         2  0.0  0.0      0     0 ?        S    Aug15   0:00 [kthreadd]
    root         3  0.0  0.0      0     0 ?        S    Aug15   0:00 [migration/0]
    root         4  0.0  0.0      0     0 ?        S    Aug15   0:00 [ksoftirqd/0]
    root         5  0.0  0.0      0     0 ?        S    Aug15   0:00 [watchdog/0]
    root         6  0.0  0.0      0     0 ?        S    Aug15   0:00 [events/0]
    root         7  0.0  0.0      0     0 ?        S    Aug15   0:00 [cpuset]
    root         8  0.0  0.0      0     0 ?        S    Aug15   0:00 [khelper]
    root         9  0.0  0.0      0     0 ?        S    Aug15   0:00 [netns]
    root        10  0.0  0.0      0     0 ?        S    Aug15   0:00 [async/mgr]
    root        11  0.0  0.0      0     0 ?        S    Aug15   0:00 [xenwatch]
    root        12  0.0  0.0      0     0 ?        S    Aug15   0:00 [xenbus]
    root        14  0.0  0.0      0     0 ?        S    Aug15   0:00 [sync_supers]
    root        15  0.0  0.0      0     0 ?        S    Aug15   0:00 [bdi-default]
    root        16  0.0  0.0      0     0 ?        S    Aug15   0:00 [kintegrityd/0]
    root        17  0.0  0.0      0     0 ?        S    Aug15   0:00 [kblockd/0]
    root        18  0.0  0.0      0     0 ?        S    Aug15   0:00 [kseriod]
    root        20  0.0  0.0      0     0 ?        S    Aug15   0:00 [khungtaskd]
    root        22  0.0  0.0      0     0 ?        S    Aug15   0:00 [kswapd0]
    root        23  0.0  0.0      0     0 ?        S    Aug15   0:00 [aio/0]
    root        24  0.0  0.0      0     0 ?        S    Aug15   0:00 [jfsIO]
    root        25  0.0  0.0      0     0 ?        S    Aug15   0:00 [jfsCommit]
    root        26  0.0  0.0      0     0 ?        S    Aug15   0:00 [jfsSync]
    root        27  0.0  0.0      0     0 ?        S    Aug15   0:00 [xfs_mru_cache]
    root        28  0.0  0.0      0     0 ?        S    Aug15   0:00 [xfslogd/0]
    root        29  0.0  0.0      0     0 ?        S    Aug15   0:00 [xfsdatad/0]
    root        30  0.0  0.0      0     0 ?        S    Aug15   0:00 [xfsconvertd/0]
    root        31  0.0  0.0      0     0 ?        S    Aug15   0:00 [glock_workqueue]
    root        32  0.0  0.0      0     0 ?        S    Aug15   0:00 [delete_workqueu]
    root        33  0.0  0.0      0     0 ?        S<   Aug15   0:00 [kslowd000]
    root        34  0.0  0.0      0     0 ?        S<   Aug15   0:00 [kslowd001]
    root        35  0.0  0.0      0     0 ?        S    Aug15   0:00 [crypto/0]
    root        38  0.0  0.0      0     0 ?        S    Aug15   0:00 [net_accel/0]
    root        39  0.0  0.0      0     0 ?        S    Aug15   0:00 [sfc_netfront/0]
    root        40  0.0  0.0      0     0 ?        S    Aug15   0:00 [kstriped]
    root       134  0.0  0.0      0     0 ?        S    Aug15   0:00 [kjournald]
    root       178  0.0  0.1  17160   224 ?        S    Aug15   0:00 upstart-udev-bridge --daemon
    root       181  0.0  0.1  16876   176 ?        S<s  Aug15   0:00 udevd --daemon
    root       270  0.0  0.1  16872   156 ?        S<   Aug15   0:00 udevd --daemon
    root       280  0.0  0.0  16872    40 ?        S<   Aug15   0:00 udevd --daemon
    syslog     337  0.0  0.4 123808   672 ?        Sl   Aug15   0:00 rsyslogd -c4
    102        351  0.0  0.3  23416   552 ?        Ss   Aug15   0:00 dbus-daemon --system --fork
    root       395  0.0  0.2  49252   320 ?        Ss   Aug15   0:00 /usr/sbin/sshd
    root       402  0.0  0.0   6072    52 tty4     Ss+  Aug15   0:00 /sbin/getty -8 38400 tty4
    root       404  0.0  0.0   6072    52 tty5     Ss+  Aug15   0:00 /sbin/getty -8 38400 tty5
    root       407  0.0  0.0   6072    52 tty2     Ss+  Aug15   0:00 /sbin/getty -8 38400 tty2
    root       409  0.0  0.0   6072    52 tty3     Ss+  Aug15   0:00 /sbin/getty -8 38400 tty3
    root       413  0.0  0.0   6072    52 tty6     Ss+  Aug15   0:00 /sbin/getty -8 38400 tty6
    root       418  0.0  0.3  21068   592 ?        Ss   Aug15   0:00 cron
    root       443  0.0  0.0   6072    52 tty1     Ss+  Aug15   0:00 /sbin/getty -8 38400 tty1
    root       469  0.0  0.0      0     0 ?        S    Aug15   0:01 [flush-8:1]
    root       475  0.0  1.0 122920  1624 ?        Sl   Aug15   0:00 /usr/sbin/console-kit-daemon --no-daemon
    root      2684  0.0  0.2  37192   332 ?        Ss   Aug15   0:00 /usr/lib/postfix/master
    postfix   2687  0.0  0.4  39416   680 ?        S    Aug15   0:00 qmgr -l -t fifo -u
    postfix   4214  0.0  1.3  39256  2112 ?        S    18:35   0:00 pickup -l -t fifo -u -c
    root      6498  0.0  6.5 170312  9904 ?        Ss   Aug15   0:00 /usr/sbin/apache2 -k start
    www-data  6567  0.0  4.3 170648  6528 ?        S    19:28   0:00 /usr/sbin/apache2 -k start
    www-data  6568  0.0  3.7 170648  5736 ?        S    19:28   0:00 /usr/sbin/apache2 -k start
    www-data  6574  0.0  4.1 170312  6292 ?        S    19:28   0:00 /usr/sbin/apache2 -k start
    root      7945  0.0  2.2  79124  3444 ?        Ss   20:00   0:00 sshd: root@pts/0
    root      7965  0.0  1.3  17916  1988 pts/0    Ss   20:00   0:00 -bash
    root      8047  0.0  0.4   6068   740 ?        Ss   20:02   0:00 /sbin/getty -8 38400 hvc0
    root      8052  0.0  0.7  14968  1104 pts/0    R+   20:02   0:00 ps aux
    postfix  13664  0.0  0.9  41768  1444 ?        S    Aug16   0:00 tlsmgr -l -t unix -u -c
    ntp      16676  0.0  0.4  25792   616 ?        Ss   Aug15   0:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 106:110
    root     18146  0.0  1.4  73040  2184 ?        Ss   Aug15   0:00 /usr/bin/perl /usr/share/webmin/miniserv.pl /etc/webmin/miniserv.conf
    nagios   19415  0.0  1.3  38856  2112 ?        SNsl Aug21   0:00 /usr/sbin/nagios3 -d /etc/nagios3/nagios.cfg
    www-data 28407  0.0  5.0 171404  7560 ?        S    03:00   0:00 /usr/sbin/apache2 -k start
    www-data 28408  0.0  5.1 171404  7768 ?        S    03:00   0:00 /usr/sbin/apache2 -k start
    www-data 28409  0.0  4.7 171412  7180 ?        S    03:00   0:00 /usr/sbin/apache2 -k start
    www-data 28410  0.0  4.9 171404  7444 ?        S    03:00   0:00 /usr/sbin/apache2 -k start
    www-data 28411  0.0  4.7 171412  7128 ?        S    03:00   0:00 /usr/sbin/apache2 -k start
    www-data 29917  0.0  4.6 170900  7016 ?        S    03:32   0:00 /usr/sbin/apache2 -k start
    www-data 29919  0.0  4.3 170900  6576 ?        S    03:32   0:00 /usr/sbin/apache2 -k start
    root@nagios:~#
    

    From what I see, its pretty slow from all of my VPSes. Just for a note, im paying $4.3/mo for this QuickWeb VPS

  32. Asim Zeeshan's avatar
    Asim Zeeshan

    @KLIKLI I get max 20sec from the same test that was executed on all my other VPSes. From that perspetive, I’d say its slow. I am not aware of the averages. Perhaps @LEA can shed light on this?

  33. KLIKLI's avatar
    KLIKLI

    @Asim
    Yes I agree that is not a good result but you pay USD$2.99 for 25GB’s storage – how fast can you expect it to be?

  34. Asim Zeeshan's avatar
    Asim Zeeshan

    @KLIKLI I am paying just $4 for a 60GB storage VPS with another provider and its blazing fast, it takes 12 seconds to run the same command.

    If it, the new vps, does not go per my expectations, I cancel them like I cancelled this service within 24 hours. I do understand that may be average users do not care about I/O or long waits. Nothing personal, just my personal opinion.

    Thanks @KLIKLI and @Jackk for checking in, appreciate it

  35. Mike's avatar
    Mike

    Spacerich: Nobody bothers to open tickets about this because nobody expects a meaningful resolution. This is not uncommon on VM nodes with poor disk performance, and most of us here are well aware of this. Relentlessly harrassing you with support ticket after support ticket isn’t going to magically make the hard drives faster. 🙂

    However, because I’m a masochist, I’ve just now opened a ticket, “formally” informing you of this issue in Chicago. May it bring you much joy and happiness…

  36. Susann's avatar
    Susann

    Lowly25 promo is not working. Pls help…….

  37. LEA's avatar
    LowEndAdmin Author

    On the very VPS that hosts this blog (QuickWeb):

    $ time (dd if=/dev/zero of=/tmp/test bs=64k count=16k > /dev/null; sync)
    real    0m17.332s
    user    0m0.012s
    sys     0m0.668s
    

    So 17 seconds for me.

    HOWEVER, I am not familiar with OpenVZ. Calling /bin/sync *might* require the entire kernel buffer to be sync to disk — not just your VE but the entire box (remember this shared kernel goodness). That might be reason why it is so slow on OpenVZ.

    Still, Xen wins hand down in my book in terms of isolation and often performance.

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *