Low End Virtual

BuyVM KVM Birthday Sale – $25/Year 128MB in San Jose

BuyVM People probably have been waiting since the last BuyVM sale. Yes, the re-stock is finally here, and at 1PM GMT-7 on 15 October 2011 (yes today), they will be available on BuyVM‘s website (or use DoesBuyVMHaveStock.com). It’s a birthday sale — not exactly BuyVM’s birthday (which would be April 26 according to the domain registration date), but the Chief Pony’s. All the plans will be restocked, but Fran has noted some KVM plans that might be of interest. For example:

  • 128MB memory
  • 15GB storage
  • 500GB/month data transfer
  • $25/Year
  • 256MB memory
  • 30GB storage
  • 1000GB/month data transfer
  • $5/Month
  • 128MB memory
  • 250GB storage
  • 100Mbps download/5Mbps upload unmetered
  • $7/Month

(Yes I know the last one was $7.50/month on BuyVM at the moment, but Fran did write $7/month in his email, with a note saying “very very limited stock of these”). Windows 2003 is also available on all KVM plans for no extra charge. San Jose servers — all owned gears with some pretty nice network connectivity. Since August they have also replaced SolusVM with their own control panel known as “Stallion” that’s specially designed for KVM.

So there you go. For Francisco — Happy Birthday! and for the rest of you — get your stopwatch ready because from experience it’s going to be a rush. 1PM GMT-7, or 1318708800 seconds since epoch (I think).

573 Comments

  1. Jack's avatar
    Jack

    Well i have learnt a few things from Buyvm.

    one being you can’t have CENTOS on a 128mb kvm machine :)!

    Francisco – How many nodes do you have now? all in same location? all same CPU? may you give me some more information about the company i have purchased from :)! Loving the 400MB/s I/O

    • Francisco Dias's avatar
      Francisco Dias

      – We’re at 70 nodes
      – Everything is in San Jose, California for now. We have people asking us to open a 2nd location but we’re just not sure yet or where
      – All OpenVZ servers use (E|L)5520’s and all of our KVM nodes use L5420’s. The L5420’s are a little older but they still work well. At some point we’ll be repleacing all of our KVM nodes with E3’s/sandy bridge CPU’s
      – CentOS on a 128MB KVM isn’t possible, at least for the installer. Anthony has been granting RAM bumps for people once in a while 😉

      Francisco

        • Francisco Dias's avatar
          Francisco Dias

          The datacenter is built under California earthquake laws and likely has been improved since then for that very reason 🙂

          Market Street Tower has a lot of govt. contracts/setups in there so they take their job very seriously when it comes to any sort of maintenance/possible issues.

          Francisco

      • rkrazy's avatar
        rkrazy

        Coresite Miami. Work and pleasure all in one.

  2. Firas's avatar
    Firas

    Francisco,

    How could i contact you via email please? am a customer in your company.

    Regards.
    ^F.B

    • Francisco Dias's avatar
      Francisco Dias

      As I tweeted:

      – You’re using RTL8139
      – The CPU’s are L5420’s so some benchmarks, namely threading performance, isn’t as amazing as it could be 🙁 Newer CPU’s (Xeon 55xx+, 34xx, etc) all have better virtualization instruction sets so they get proper speeds. In the unixbench tests you’ll notice that the excell tests are not terrible, but by no means as good as it should be, that’s entirely due to the older cpu’s.

      With that being said, KVM is slated to get better gear in the new year. We did the same thing with OpenVZ to really feel out how much interest there is. We’ll probably go with some E3’s unless the E5’s are worth it 🙂

      Francisco

  3. drmike's avatar
    drmike

    I gave some thought about picking up one of these with my seasonal money as I have a number of projects coming up shortly but after Aldryic’s recent bigoted remark towards me in LET, I think I’ll pass.

    Aldryic, go make light of some handycap folks. Appears that’s acceptable to you.

    • Aldryic C'boas's avatar
      Aldryic C'boas

      Sorry drmike, but professional standards prevents me from a proper response. You are, however, more than welcome to either ignore me (like you said you would ten minutes ago), contact me via PM to work out your issues, or simply cease attempting to troll. Thank you.

  4. Geoffrey's avatar
    Geoffrey

    Is there a reason that anonymizer.com, webhostlist and LEB is not reachable via BuyVM? (Using it as a proxy/tunnel)

    • jay's avatar
      jay

      its loading for me. i’m connect via vpn server from buyvm.
      as a proof, i saw a guy on anonymizer that looks like the guy on quickweb ;D

      • Dirty Sanchez's avatar
        Dirty Sanchez

        I can’t reach anonymizer.com from my BuyVM VPS with OpenVZ. Do you mind posting a traceroute jay?

        • paul's avatar
          paul

          I don’t seem able to reach anonymizer from anywhere. I tried from home isp and 3 different vps’s in different locations. traceroute takes several hops in cogentco or above.net network and then fails.

    • Francisco Dias's avatar
      Francisco Dias

      Traceroutes might act up but I had no issues accessing any of these personally when I was testing.

      If you’re having an issue just log a ticket.

      Be aware, though, that many providers use anycast setups now with cloudflare and such so traceroutes are backasswards.

      Francisco

  5. The Purist's avatar
    The Purist

    BuyVM has been so elusive for me. I’ve been trying to buy a VM from them for the past one year but was never lucky. 🙂

  6. Francisco Dias's avatar
    Francisco Dias

    Figured i’d give an update to people curious about what we’ve been busy with recently.

    – We opened a public trial to help with the testing of a new kernel. Performance has been top notch and, fingers crossed, all stability issues with it have been figured out. We expect to have a production node running this sometime tomorrow to pave way for the rest.
    – All of our KVM nodes are being upgraded to E3 1230’s at no additional cost to current customers. Take this as a christmas present of sorts from us 🙂
    – We expect to have stock on all of our plans, as well as 260 or so 128MB’s, in a week or two. I’ll submit information to LEA and hopefully he’ll have time/interest to post us.

    Thanks for the continued interest.

    Francisco

    • fefaya's avatar
      fefaya

      “All of our KVM nodes are being upgraded to E3 1230′s at no additional cost to current customers”
      Do we need to reinstall the OS because of this upgrade?

      • Aldryic C'boas's avatar
        Aldryic C'boas

        No reinstall will be necessary, and no client data will be effected by the upgrade. Aside from the downtime from when we change the hardware, the only thing you’ll notice is the increase afterwards 😛

      • drmike's avatar
        drmike

        I wonder how many customers know what an E3 1320 is.

        • Chris Fabozzi's avatar
          Chris Fabozzi

          Do you mean 1230? There is no 1320 :-P…. should have went with the 1270’s for a few hundred more… we love em 🙂

          Regards,

          Chris

        • Bob's avatar
          Bob

          @Chris: 100 EUR more for almost no increase in performance… I wonder if it’s worth it!

        • Chris Fabozzi's avatar
          Chris Fabozzi

          It is worth is as I have worked with both. Overall your getting a more stable CPU that can handle a higher load if it got to that point. Instead of worrying about load spikes, you would be perfectly fine.

  7. Francisco Dias's avatar
    Francisco Dias

    As another update on what’s going on around our parts:

    – Production trials of our new kernel are in place against nodes: 02, 14, 22
    – Results have been extremely positive with huge IO performance increases

    (03:34:36) node14:~ root: dd if=/dev/zero of=test bs=64k count=1k oflag=dsync
    
    1024+0 records in
    1024+0 records out
    67108864 bytes (67 MB) copied, 1.50365 s, 44.6 MB/s
    (03:34:40) node14:~ root:
    (03:34:40) node14:~ root: rm -rf test
    (03:34:44) node14:~ root: dd if=/dev/zero of=test bs=64k count=8k conv=fdatasync
    
    8192+0 records in
    8192+0 records out
    536870912 bytes (537 MB) copied, 1.15334 s, 465 MB/s
    

    – All around responsiveness is improved heavily and new monitoring systems are being developed as we speak to allow us to better throttle abusive users before they cause issues for others
    – A new alerts system is being developed into stallion that will give people full logs of actions our systems have taken against their VM with emails sent:
    — Examples of alerts that users will be sent emails + logs for:
    — Very high loads in their VM
    — Very high IOP/s usage on their VM
    — Very high MB/sec usage on their VM (to the disk)
    — Running a process that we’ve deemed to be a violation (we’ll have a full check list on the AUP/TOS before this goes in place
    — Single processes gobbling a ton of CPU

    The alerts system is mostly done and is just in testing, we hope to have it in use and keeping everything in order by the start of January.

    More stock is on the way for January as well. We’re currently not restocking so we can get everything rolled with the new kernel + adjustments.

    Merry ponymas to all, and to all a good thrust!

    Francisco

    • Asim Zeeshan's avatar
      Asim Zeeshan

      The “alerts for the owner” is a cool feature. I love that on LINODE because it helps me to fix issues before they become a pain for other users on the same node.

      Waiting to see these features roll out

      • Francisco Dias's avatar
        Francisco Dias

        The new kernel gives us a lot more control over a VM so we don’t have to resort to suspending over heavy resource use most of the time, we can simply throttle the VM down to acceptable levels until they reply to the logged ticket. We may even make it automatically open a ticket with us so they can talk to us about it.

        Either way, it’s looking good and i’m really excited about it.

        Francisco

  8. Miguel Ângelo Santos Pereira / MrGeneral's avatar
    Miguel Ângelo Santos Pereira / MrGeneral

    Pretty awesome results! Damn!

    Congratulations for those results 😀

  9. Francisco Dias's avatar
    Francisco Dias

    @littleguy – We’re using debian 6 based nodes w/ a 2.6.32 based kernel so vswap is enabled, mostly.

    vswap itself has some serious design flaws that we don’t like that much, namely in how vswap is shown on the HN. With that being said, though, we do use the proper RAM account of vswap so the RAM you paid for is the RAM you get (it access RES as your usage, not VIRT like normal OpenVZ).

    Until vswap addresses the account quirks, or we simply make modifications to our node monitoring scripts, we’re simply allocating people 2x their RAM to give them ‘burstable RAM’.

    Francisco

  10. Victor's avatar
    Victor

    I know there’s no stock, but any chance of getting an upgrade to 256/512 OpenVZ?

  11. Victor's avatar
    Victor

    Benchmarks for my 128 MB OpenVZ plan with BuyVM:
    UnixBench:

    ========================================================================
    BYTE UNIX Benchmarks (Version 5.1.3)

    System: 205.185.126.195: GNU/Linux
    OS: GNU/Linux -- 2.6.32-042stab049.2 -- #1 SMP Wed Jan 25 19:56:33 MSK 2012
    Machine: i686 (i386)
    Language: en_US.utf8 (charmap="UTF-8", collate="UTF-8")
    CPU 0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (4522.0 bogomips)
    Hyper-Threading, x86-64, MMX, Physical Address Ext, SYSCALL/SYSRET
    07:41:42 up 21:12, 1 user, load average: 0.15, 0.08, 0.02; runlevel 3

    ------------------------------------------------------------------------
    Benchmark Run: Tue Jan 31 2012 07:41:42 - 08:10:21
    1 CPU in system; running 1 parallel copy of tests

    Dhrystone 2 using register variables 12377044.6 lps (10.0 s, 7 samples)
    Double-Precision Whetstone 2343.9 MWIPS (10.1 s, 7 samples)
    Execl Throughput 1729.7 lps (29.7 s, 2 samples)
    File Copy 1024 bufsize 2000 maxblocks 427154.6 KBps (30.0 s, 2 samples)
    File Copy 256 bufsize 500 maxblocks 139262.8 KBps (30.0 s, 2 samples)
    File Copy 4096 bufsize 8000 maxblocks 967912.8 KBps (30.0 s, 2 samples)
    Pipe Throughput 1270304.8 lps (10.0 s, 7 samples)
    Pipe-based Context Switching 10964.3 lps (10.0 s, 7 samples)
    Process Creation 3295.6 lps (30.1 s, 2 samples)
    Shell Scripts (1 concurrent) 941.7 lpm (60.1 s, 2 samples)
    Shell Scripts (8 concurrent) 208.9 lpm (60.2 s, 2 samples)
    System Call Overhead 1983388.2 lps (10.0 s, 7 samples)

    System Benchmarks Index Values BASELINE RESULT INDEX
    Dhrystone 2 using register variables 116700.0 12377044.6 1060.6
    Double-Precision Whetstone 55.0 2343.9 426.2
    Execl Throughput 43.0 1729.7 402.3
    File Copy 1024 bufsize 2000 maxblocks 3960.0 427154.6 1078.7
    File Copy 256 bufsize 500 maxblocks 1655.0 139262.8 841.5
    File Copy 4096 bufsize 8000 maxblocks 5800.0 967912.8 1668.8
    Pipe Throughput 12440.0 1270304.8 1021.1
    Pipe-based Context Switching 4000.0 10964.3 27.4
    Process Creation 126.0 3295.6 261.6
    Shell Scripts (1 concurrent) 42.4 941.7 222.1
    Shell Scripts (8 concurrent) 6.0 208.9 348.2
    System Call Overhead 15000.0 1983388.2 1322.3
    ========
    System Benchmarks Index Score 493.0

    GeekBench: http://browse.geekbench.ca/geekbench2/552996

    Concise summary, in comparison to the 128 MB KVM results by user 96MB:

    UnixBench scores are similar (OpenVZ 493, KVM ~530). KVM may have a slightly higher overall score, but OpenVZ actually has higher indices in more than half the tests. OpenVZ only lost clearly in “Pipe-based Context Switching”, with a mere 27.4.

    GeekBench scores: OpenVZ 2982 to 2210 KVM. Similar scores for both integer and float sections. OpenVZ got 4173, 2830 in memory, stream performance respectively. KVM got ~1550, ~1400.
    test

    • Francisco Dias's avatar
      Francisco Dias

      Thanks 🙂

      You should see a nice boost from the new KVM stuff when it’s online (everything is getting upgraded to E3’s).

      Your geekbench scores will be in the 4k – 5k range.

      Francisco

  12. KLIKLI's avatar
    KLIKLI

    Just a small side question.. do you have any plans to restock your frantech cPanel reseller plans?

    • Francisco Dias's avatar
      Francisco Dias

      I’ll know sometime this week if that’s going to happen or not.

      I’m wanting to at least sell out the cpanel box we got with buyshared & the FT plans.

      I’ll need to resize the FT reseller plans as their resources are skimy compared to BuyShared.

      Which plan are you interested in?

      Francisco

  13. Valery's avatar
    Valery

    For Francisco — Happy birthday!

    I have waited for cheapest Windows(KVM-128MB)VPS. But when ordering there is «This product will not run Windows». What does this mean, ordering Windows VPS Shopping Cart does only talk over BuyVM-KVM-128MB «Windows 2003» may not properly work, we can order Windows VPS and setup Windows to try KVM-128MB?

    To write questions, I unfortunately haven’t found any EMail address.

    • tux's avatar
      tux

      You can run MSDOS on this plan 🙂

  14. a's avatar
    a

    Greetings! Very helpful advice in this particular post!

    It’s the little changes that make the greatest changes.
    Thanks a lot for sharing!

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *