Low End Virtual

HostRail – $1.20 256MB OpenVZ VPS Exclusive Offer

Updated July 2011 — HostRail is now officially HostFail. Domain is no longer resolving. See this thread on WHT for discussions there.

HostRail Constantinos from HostRail is offering LowEndBox readers a massive recurring discount — 60% off on all VPS plans when you use promo code Lowendbox60. That applies to all their offers, including their standard fully managed OpenVZ VPS, off-shore OpenVZ VPS in Netherlands and Germany, and SHOUTcast/OpenFire VPS (purposely built, but price a bit out of range). Their “1 Power Unit VPS” will be $1.20/month after the discount (sign up link).

  • 256MB memory
  • 30GB storage
  • 200GB/month data transfer
  • 0.3GHz CPU
  • OpenVZ/SolusVM

Dallas servers I believe. 0.3GHz would mean that it is probably too slow to run anything serious, however at $1.20/month — there is no need for annual payment — it’s pretty good value, consider 30GB of storage comes with it. Whether HostRail can deliver is another matter, but I am giving them the benefit of doubt by posting their offer here 🙂

HostRail is a Cyprus registered business. Been in business since 2004 and the domain was registered since 2007. Note that this offer expires on 31 October.

600 Comments

  1. dirk's avatar
    dirk

    Do you also offer those ipv6 addresses in Germany?

    • Constantinos's avatar
      Constantinos

      Unfortunately there isn’t any IPv6 support in Netherlands or Germany yet.

      • dirk's avatar
        dirk

        Is the offer (60% off) still valid (for an existing customer)?

      • dirk's avatar
        dirk

        Is ipv6 by now supported on VPSes in Germany?

  2. rm's avatar
    rm

    Now the Uranus node is down for almost 2 hours… I suppose it is being under maintainance or something?

    • Snape's avatar
      Snape

      They e-mailed saying engineers were working on it, it was being rebooted, it was doing an FSCK which would fix the problems(?), and it had finished and was booting VMs. That was… 25 minutes ago.

      3363 packets transmitted, 0 received, +1664 errors, 100% packet loss, time 3368574ms

      • rm's avatar
        rm

        Back up now. Still no working IPv6, I was kinda hoping it was down to fix that.

        • Snape's avatar
          Snape

          Alas, no. I don’t have any IPv6 addresses assigned, but I note that suddenly venet0 *has* IPv6, which it didn’t do before the reboot. ::1/128 isn’t super useful, but it’s more than was there earlier.

      • Constantinos's avatar
        Constantinos

        IPv6 is nearly there guys, the reboot fixed one issue with IPv6 and a big issue with the load on the server which some people were reporting for the server being slow.

        The FSCK found a couple of bad sectors which it repaired.

        • dmmcintyre3's avatar
          dmmcintyre3

          How are you planning on solving this if “the venet device is currently not fully compatible with IPv6”?

        • Constantinos's avatar
          Constantinos

          Well there is always the VETH device 🙂 – all clients that need IPv6 will be changed to VETH device unless we get an email that a patch is coming out for VENET that fixes this.

        • rm's avatar
          rm

          @Constantinos
          Right now I have a BuyVM OpenVZ VPS which supports IPv6 absolutely fine on the venet device(!).
          And this is on an older kernel than you have.
          Are you sure you verified it is not a netfilter/ip6tables issue?
          A friend of mine has detailed a possible fix if it is – http://slexy.org/view/s21e7Un6BB
          I think he also sent that information in a ticket to you directly.
          From what I can see/test, this is your bug: http://bugzilla.openvz.org/show_bug.cgi?id=1327
          And the fix detailed in pastebin text above, would fix the matters splendidly.
          However it is OK with me to use veth if you can not or do not want to fix it in any other way.

        • Constantinos's avatar
          Constantinos

          @rm: Thanks for the information. Using VENET makes everything much easier – i will look into this.

        • rm's avatar
          rm

          Don’t give up on IPv6, @Constantinos 🙂

  3. chachiris's avatar
    chachiris

    you dumb kids, you are paying $1.10 and act like you paid $20/m.
    Just give him time to adjust and fix, he will get back to you.
    Even $10/m vps providers do not offer IPv6, look at WHT, also, why do you need IPv6?
    You don’t need that crap.

    • dirk's avatar
      dirk

      Maybe you’re the dumb kid in this story, by putting that ipv6 is crap. ipv6 is the new (well new it already exists for over 10 years) standard that will replace ipv4!

  4. chachiris's avatar
    chachiris

    dumb is, dumb does.
    It will replace ip4? I heard that since 2000. so it’s going to replace tomorrow?
    Is that the reason why you kept asking ipv6?
    You probably won’t have any courage to ask ipv6 to $20/m vps, but to $1.20 cheap one, you can act like a rich kid spending wow $1.20, where is my ipv6? dumb ass…

    • dirk's avatar
      dirk

      It’s not going to do this tomorrow, however if you can believe the stats on ipv4, we’re running out on ipv4 addresses quickly.
      I keep asking for ipv6 addresses to ALL providers I contact, both those at $1.2 as those at $20/month. I now have 20 VPSs, and for one of the project I only “use” VPSes that also have ipv6, that’s my selection criteria, like others would use use bandwidth or the VPS control panel that is being used.
      If your judgement is based on what you see on LEB, then it’s normal that you only see questions towards low-costs VPSes, as that is what LEB is about. You don’t see my mail and you don’t see the chats I have with other providers, so don’t judge me on how I’m asking about ipv6.

      • Constantinos's avatar
        Constantinos

        dirk is actually right, IPv4 will completely run out long before the end of 2011. We as a service provider are doing our best to have a fully complaint IPv6 network ASAP.

        Unfortunately we did fall into some issues:

        1) HyperVM does not support auto-assigning IPv6 Addresses – we have overcome this problem by manually assigning IPv6 Addresses
        2) VENET is not yet fully compliant with IPv6 yet – only option currently is to change the VENET device to the VETH device for the clients that need IPv6 Compatibility
        3) IPv6 Routing Problems – These have been fixed are continued to get fixed as they appear

        As IPv6 for us is just released (for us) and not yet fully supported by our provider we expect these issues, IPv6 Support was added to our provider only in August 2010 so its still quite new and issues are expected until software vendors update their software to be IPv6 Compliant.

        At this moment i will make my first test with a public VPS, i expect the test to succeed fully – i apologize for the delay, this test should have been done on Saturday morning however due to other issues that required my immediate attention i needed to postpone this.

        I will keep you all updated as we hit important milestones in my test with a public VPS.

  5. chachiris's avatar
    chachiris

    ya, a huge comet will hit the earth in the future, too.

    • thanks99K's avatar
      thanks99K

      Now that you know where you will be on the day the world ends, you get to decide which train you’d like to ride ??? Ha Ha Ha

    • dirk's avatar
      dirk

      I wish you all the luck with your none-future-view

      • Gary's avatar
        Gary

        Don’t feed the troll.

        The simple truth is that when ipv6 becomes mainstream, those who didn’t adopt it early will be behind the curve, and people who need v6 compatibility will use the early adopters’ software/services/whatever.

        Holding off until the last minute is stupid. Which makes sense, considering he’s a troll.

    • InsDel's avatar
      InsDel

      Let’s say that the Internet began in 1969 when ARPANET got started. In the 41 years since then, over 95% of the IPv4 addresses have been assigned. If IPv4 addresses are consumed at the same constant rate of 2.317%/year, there’s still only about 2 years left before IPv4 exhaustion. Other estimates say it’ll come quite a bit faster:
      http://ipv6.he.net/statistics/

  6. Spirit's avatar
    Spirit

    chachiris people have different needs and your judges without knowing us are so narrow-minded. I really dislike people with “we know what’s best for you” attitude and you don’t go far away from that. Just because you don’t need, don’t require something it doesn’t mean that we’re in same boat. And regarding your insultive childish “you dumb kids”.. argument, my rough guess would be that you’re way younger (and dumber?) than most of us here. It’s completely irrelevant how much do we pay for vps – it’s an offer, we’re HERE and NOW, we talk about IPv6, we hope that it will works… and your nonsenses have no other purpose than meaningless wanna-be-smart trolling.

  7. marrco's avatar
    marrco

    uranus slow again. Constantinos, can you move me on a better server. Its 2 weeks and lots of trouble tickets that i hear the problem has been solved. First an abusing user,than a filesystem error,what now? i’m not interested in ipv6,just a normal vps. Ticket open

    vps002:~# time uptime
    19:04:19 up 19:15, 1 user, load average: 0.13, 0.06, 0.01

    real 0m5.476s
    user 0m0.000s
    sys 0m0.001s
    vps002:~# time ls /var
    backups cache lib local lock log logauth.log logmail.err mail opt run spool tmp www

    real 0m17.596s
    user 0m0.000s
    sys 0m0.001s
    vps002:~#

    • Yomero's avatar
      Yomero

      LOL

      user@vps:~$ time uptime
      13:20:43 up 2 days, 13:45, 3 users, load average: 1.11, 0.72, 0.73

      real 0m12.042s
      user 0m0.000s
      sys 0m0.002s

      This is in NEPTUNE…may be my load n_n

      • tommy's avatar
        tommy

        really awsome right ?
        just trying login to my vps after few days. 5 minutes just to login 🙂
        dont ask for refund, they wont give your money back.

        have fun everybody.

        • Yomero's avatar
          Yomero

          LOL, you are in uranus too. IMHO neptune is ok, but I am using fully my 300 mhz..and almost no I/O, that’s weird, because “time uptime” uses I/O to read the command, Am I right?

          And a refund? Nah, xD

          Btw the server is useful for me, maybe I can put my teamspeak and other little services in that box n_n Just monitoring the behavior of this server and then migrate

        • tommy's avatar
          tommy

          yups 🙂 im there :))

          i only use these vps for backup database, mx backup and dns, but … take ages just to do “free -m” command 😀 and IPv6 not working.

          yeah refund 🙂
          they dont offer refund and too overload vps node i dont want to upgrade my VPS, this $1.2 vps only for testing, If I’m happy i’ll upgrade to 1 GB memory,

    • Constantinos's avatar
      Constantinos

      You should be happy now i think 🙂 . Your VPS should be nice and quick now

      • marrco's avatar
        marrco

        Yes, so far i’m definitely happy. Hope my VPS stay usable for more than a few days. Great support for a cheap vps.

  8. chachiris's avatar
    chachiris

    In year, 2000, right before, everybody talked about virus, bought bunch of anti-virus program.
    did it happen? dumb is dumb does.

    • Gary's avatar
      Gary

      Are you talking about the Y2K bug? It was nothing to do with viruses. If you’re actually talking about virus stuff, there was no predicted explosion in viruses that I remember, and I don’t recall anyone buying AV software en masse.

      Take your pills and leave the house, you suck at internets.

      • dirk's avatar
        dirk

        Just before Y2K there were some serious virus outbreaks, that’s correct.

        And about the Y2K bug…if nobody had done anything then we would have had a lot of work fixing it afterwards…

        But this ipv6 thing has nothing to do with virusses nor with a Y2K bug. This is about working with the future and not only with past & present. If chachiris doesn’t want it, that’s his choice….but there is NO reason at all to get that attitude because other want it. I’m sure that the day he buys a car and gets a good price, that he won’t complain on the missing options … hé you got a good price, we can skip those options….

    • dirk's avatar
      dirk

      No it didn’t happen on those sites were you had the anti-virus. I was admin at that time of a “sub”-network of a large network spreading 4 countries. And only those that had a 3-layer AV defense didn’t get any issue. Those that didn’t have it…well it took them a couple of week to get their mailsystem again up-and-running….

      • innya's avatar
        innya

        Y2k bug was real. It was not that much affected to personal computer or local area network. It was mostly for old software codes that used by the mid to large companies. I did fix software code for a few of the Gas and electric companies in us.

  9. Remember's avatar
    Remember

    :~# dd if=/dev/zero of=test bs=64k count=256 oflag=dsync
    184+0 records in
    184+0 records out
    12058624 bytes (12 MB) copied, 217.807 s, 55.4 kB/s

    • dmmcintyre3's avatar
      dmmcintyre3

      dd if=/dev/zero of=test bs=64k count=256 oflag=dsync
      256+0 records in
      256+0 records out
      16777216 bytes (17 MB) copied, 0.465435 seconds, 36.0 MB/s

      My VPS is on one.hostrail.com

  10. daniel's avatar
    daniel

    @Constantinos.
    I’am also having problems on uranus during last days. It is really slow. Please move my vps to different node.
    Ticket already opened: #895224

    dalish:~# time uptime
    23:16:09 up 2 days, 1:25, 3 users, load average: 3.51, 1.90, 0.92

    real 0m45.220s
    user 0m0.000s
    sys 0m0.009s

    dalish:~# time free -m
    total used free shared buffers cached
    Mem: 256 33 222 0 0 0
    -/+ buffers/cache: 33 222
    Swap: 0 0 0

    real 0m33.447s
    user 0m0.002s
    sys 0m0.002s

    Thanks.

  11. Remember's avatar
    Remember

    @Constantinos , pls check my problem below, ticket was opened as #936086

    :~# dd if=/dev/zero of=test bs=64k count=4k oflag=dsync
    405+0 records in
    405+0 records out
    26542080 bytes (27 MB) copied, 497.32 s, 53.4 kB/s

    • Yomero's avatar
      Yomero

      Interesting! The results with that “dsync” in Neptune are really bad too

      $ dd if=/dev/zero of=test bs=64k count=256 oflag=dsync
      256+0 records in
      256+0 records out
      16777216 bytes (17 MB) copied, 219.475 s, 76.4 kB/s

        • Yomero's avatar
          Yomero

          I wait your feedback about your ticket n_n
          May be I will submit one

          ——
          SPAM:
          How you get a .tk domain without advertising everywhere? Your page is clean xD

          END SPAM
          —

        • Yomero's avatar
          Yomero

          SPAM:
          Wow, I’m so noob xD

          I’m entering to the VPS world, and learning A LOT.

          I want a tk!!

        • ibk's avatar
          ibk

          .tk is now free. truely free, no ads, etc.

        • Yomero's avatar
          Yomero

          Yeah, I see that 😀 Is great!

          Now the question is.. what tk to choose?? 😀

        • Remember's avatar
          Remember

          @Yomero Acturally,I don’t recommend tk domain,coz you have just the right
          to use , you don’t have the domain indeed,it is owned by dot.tk themselves

        • Yomero's avatar
          Yomero

          Maybe is ok for my personal blog or something like that…

          Ok… 9 usd isn’t a lot for a .com xD but for a simple start… What do you think?

        • Remember's avatar
          Remember

          @Yomero You may wait for Godaddy’s deal , $0.99 for 1 .com domain,they always release such coupon code before holidays.

        • Yomero's avatar
          Yomero

          Excelent! I will try to catch that coupon n_n

    • Yomero's avatar
      Yomero

      Another provider known here… (with SLOOOOOOW support and deployment….)

      $ dd if=/dev/zero of=test bs=64k count=256 oflag=dsync
      256+0 records in
      256+0 records out
      16777216 bytes (17 MB) copied, 0.643738 s, 26.1 MB/s

      • Yomero's avatar
        Yomero

        OMFG! That is nasty xD

        Some abusers in our node may be…

      • Constantinos's avatar
        Constantinos

        one.hostrail.com doesn’t have any abusers.

        @Yomero, did you open a ticket?

        Today earlier in the morning (from 12:46am – 2:02am) i was informed by our Network Operations Center Team that we did a clear out operation on 3 different servers, all Abusers found were suspended/terminated.

        • Bob's avatar
          Bob

          Which servers have been cleaned? Does that include Saturn? Results from a saturn server taken this morning:

          root@vps3:/home# dd if=/dev/zero of=test bs=64k count=256 oflag=dsync
          256+0 records in
          256+0 records out
          16777216 bytes (17 MB) copied, 21.578 s, 778 kB/s
          root@vps3:/home# dd if=/dev/zero of=test bs=64k count=256 oflag=dsync
          256+0 records in
          256+0 records out
          16777216 bytes (17 MB) copied, 0.728402 s, 23.0 MB/s
          root@vps3:/home# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
          512+0 records in
          512+0 records out
          33554432 bytes (34 MB) copied, 53.0416 s, 633 kB/s
          
        • Bob's avatar
          Bob

          Another test done 10 mins later. No wonder the server lags.

          root@vps3:/home# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
          512+0 records in
          512+0 records out
          33554432 bytes (34 MB) copied, 120.522 s, 278 kB/s
          
        • Bob's avatar
          Bob

          My best result so far:

          root@vps3:/home# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
          512+0 records in
          512+0 records out
          33554432 bytes (34 MB) copied, 550.813 s, 60.9 kB/s
          
        • Spirit's avatar
          Spirit

          Yeah, maybe they moved problematic users from other nodes to Saturn.

          I also noticed some lag and atm I am basicly stucked with apt-get remove…. approx 10 minutes passed and sendmail still isn’t removed. Damn annoying. With all what I saw here in last few days I am afraid that this vps isn’t worth even 1$.

  12. Spirit's avatar
    Spirit

    Saturn node.

    time free
    total used free shared buffers cached
    Mem: 262144 31912 230232 0 0 0
    -/+ buffers/cache: 31912 230232
    Swap: 0 0 0

    real 0m14.816s
    user 0m0.001s
    sys 0m0.003s
    box1234:~#

    • Constantinos's avatar
      Constantinos

      An update to everyone, tomorrow (10th November 2010) we’ll be upgrading the hardware on the following nodes: Saturn.HostRail.com, Jupiter.HostRail.com, Uranus.HostRail.com, Neptune.HostRail.com, Terra.HostRail.com and One.HostRail.com. The remainder nodes will be upgraded next week.

      In the next 8 hours we will be sending emails to everyone with the exact timetable – each node will be offline for approximately 30 minutes. The hardware planned has been planned extensively as you will see from the timetable that we will send. We will also be providing real time updates to everyone, more information will be included in the email that we will send.

      • Bob's avatar
        Bob

        YES! Thank you for the great news. I hope you will get some faster storage in those servers. SSDs pretty please for Christmas? 😛

      • Yomero's avatar
        Yomero

        Thanks for the news!

        About a ticket, no Constantinos, I mean, “may be I will submit a ticket”. For my needs the VPS works, but some ocassional processes are really slow. I think we are confusing a little bit between I/O and the CPU time that we have assigned.

        My node is slow yet, but I hope the upgrades will enhance the VPS’s

        Thanks for your attention =)

  13. Raniel's avatar
    Raniel

    Sounds very very very good. I’m on neptune.hostrail.com was very excited installing virtualmin gpl but no luck. Time consumed yum upgrade and install nearly 20minutes. Virtualmin gpl consumed more than 20minutes but in the end the vps is not usable because it’s out of mem even I tweaked the preload of virtualmin. I just rebuild my os template and updated to latest patches of centos and left. NOW I’m happy to hear that and hoped I can use my vps here and will tranfer my 2 low traffic sites from my other vps. Guys I loved the support here, very superb. Some of my hairs are white already. My white hairs can tell that Constantinos support is amazing. CHEERS

  14. earl's avatar
    earl

    Looking forward to the cpu upgrade.. I purchased their “2 Power Units Server” but unixbench 4.1 only gave a FINAL SCORE of 39.5 🙁

  15. Constantinos's avatar
    Constantinos

    A lot of users have expressed their happiness regarding the upcoming CPU upgrades to the servers.

    I always try to aim to provide the best possible service and keep as many clients as i can happy.

    This upgrade will certainly make the servers faster.

    Don’t forget to bookmark http://twitter.com/HostRail – we’ll be providing real time updates from the moment we start until the moment we complete the upgrades, we always aim to keep everyone informed of the latest updates to any scheduled outages.

    • sleddog's avatar
      sleddog

      Looking forward to the new CPUs, though performance is pretty good now!

      • Yomero's avatar
        Yomero

        How you have 2 days up? o_O your node isn’t being upgraded yet? :S

    • rm's avatar
      rm

      Uranus upgraded and already up 🙂

      before I had 4 cores of:
      model name : Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
      cpu MHz : 68.780

      Now I have 4x:
      model name : Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz
      cpu MHz : 72.828

      Great 🙂
      However I don’t think the cause of slowness some people reported was the CPU; it looked more like I/O contention problem, or lack of enough free RAM on the node.

      • Snape's avatar
        Snape

        I appreciate their willingness to upgrade to *try* and fix the problems, but this does seem a bit like trying to fix horrible understeer and a bumpy ride by adding a turbocharger to your car, i.e. shiny and exciting and pretty much useless. Maybe we’re completely wrong, though.

        I’m still seeing a significant and alarming degree of iowait, but things are generally running acceptably fast. This tends to be the case whenever they reboot the node, though, so I’ll wait and see if the hardware fixed the problem, or of the abusive botters and script kiddies just aren’t smart enough to make their software run automatically at boot. 🙂

      • Yomero's avatar
        Yomero

        LOL, and my VPS still down xD, but neptune is up o_O

      • Yomero's avatar
        Yomero

        Is up now! 😀 Blazing fast answers, I like that.

        But the IO continue being slow u_u…well like Snape says, is running aceptably.

      • Jordan's avatar
        Jordan

        Seriously? A 16mhz upgrade on the CPU? They thought this was going to fix the performance issues?

  16. Neptune's avatar
    Neptune

    mine is on Neptune.HostRail.com, after cpu change, it got 5 times slower than before.
    wonder what they did.

    • Yomero's avatar
      Yomero

      LOL, well, I don’t know but at the start the iowait was worse…Maybe the other people was starting their processes too.

      Anyway, I am waiting for an package upgrade n_n

      • Spirit's avatar
        Spirit

        Your server is atleast up. Saturn seems dead.

        • Jordan's avatar
          Jordan

          Just log onto HyperVM and click boot.

  17. Neptune's avatar
    Neptune

    their site is down.

  18. Neptune's avatar
    Neptune

    should be? did you check it lately?

  19. marrco's avatar
    marrco

    mine is still down, and it’s not on saturn. So i think they have many more problems at the moment

    • Constantinos's avatar
      Constantinos

      If your VPS is offline as we said in Twitter please open a support ticket.

      • marrco's avatar
        marrco

        now is online, but i think you have abusers on this node too:

        vps002:~# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync

        512+0 records in
        512+0 records out
        33554432 bytes (34 MB) copied, 147.104 s, 228 kB/s

  20. john's avatar
    john

    Constantinos@ would you look into ticket #158232?
    It’s quite funny how your tech ansers.

    • Constantinos's avatar
      Constantinos

      I’ve checked the ticket. What he said is actually true. WHMCS does have an inconsistency/bug with the amounts it displays. As the tech answered the promo code will actually be automatically applied to all your Invoices.

      • john's avatar
        john

        Hope so, but since it shows $4.99 on My Service, it will automatically bill me $4.99.
        then I have to go thru all this nonsense again explaining, etc.
        Should I cancel this and order same thing? It would show $2.00, right?

        • Yomero's avatar
          Yomero

          LOL, that sounds like me xD My service show the same john. Support says my invoices will have the discount (2 usd total)

        • Constantinos's avatar
          Constantinos

          You will automatically billed $2, the Invoice is generated and includes the promo code. Cancelling and re-ordering will result in the same thing really.

  21. john's avatar
    john

    Constantinos@ Thanks. Hope it does.

  22. john's avatar
    john

    How come their $4.99 vps is lot slower than $1.10 vps?
    funny, go figure//

    • Constantinos's avatar
      Constantinos

      The $4.99 is the 2 Power Units yes? and the $1.10 is the 1 Power Unit yes?

  23. Bob's avatar
    Bob

    Saturn Node is still dead slow with I/O 🙁
    root@vps3:/home# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
    512+0 records in
    512+0 records out
    33554432 bytes (34 MB) copied, 133.687 s, 251 kB/s
    root@vps3:/home# free -m
    total used free shared buffers cached
    Mem: 1280 210 1069 0 0 0
    -/+ buffers/cache: 210 1069
    Swap: 0 0 0

    • Jackk's avatar
      Jackk

      disk:~# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
      512+0 records in
      512+0 records out
      33554432 bytes (34 MB) copied, 45.759 s, 733 kB/s
      disk:~#

      on Terra node.

      • Bob's avatar
        Bob

        It’s the abusers on each node. Sometimes it jumps up to 50MiB/s… Constantinos, please do something about this.

    • Yomero's avatar
      Yomero

      That is faster compared to mine n_n

    • noweb's avatar
      noweb

      ATM, mine is looking fine. uptime is 18 hrs though, saturn node.

      myvps:~# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
      512+0 records in
      512+0 records out
      33554432 bytes (34 MB) copied, 3.75352 s, 8.9 MB/s

      another try:

      myvps:~# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
      512+0 records in
      512+0 records out
      33554432 bytes (34 MB) copied, 0.839841 s, 40.0 MB/s

      from my tries at the moment ranges from 5.7MB/s to 40MB/s
      just my test box.

    • Constantinos's avatar
      Constantinos

      Saturn was experiencing some issues, it hang yesterday so we rebooted it and everything seems better up to now.

  24. Raniel's avatar
    Raniel

    My subscription is pretty useless because their are many abusers in the neptune node.

    • drmike's avatar
      drmike

      Maybe they’ll move you? Gotta admit though that for those prices, chances are all the boxes are like that. (Not saying that they are. Just making that suggestion.)

      • Raniel's avatar
        Raniel

        I hope but I also admit your second sentence.

      • Constantinos's avatar
        Constantinos

        Currently Neptune is the only one that is really slow and we are aware of the reason.

    • Yomero's avatar
      Yomero

      At least I don’t need a lot of I/O, but yes, sometimes the shell is stuck xD

  25. earl's avatar
    earl

    I think Saturn / Jupiter is down again..

    • Constantinos's avatar
      Constantinos

      At some stage Saturn went offline for around 10 minutes, there were no reported outages for Jupiter.

  26. chachiri's avatar
    chachiri

    Everything is down, this is worse than cpu swap, what’d they do?
    none of my vps’s working, and no answers.

  27. Spirit's avatar
    Spirit

    Up or down, what difference does it make? It’s useless most of the time anyway… It would be dumb to use it for anything however everytime when I curiously try to log in I need to boot it from console first as it’s always frozen or something. Some buyVM vps have pretty often some issues or so but it can be still used for some not too much serious work while this one… it’s out of competition! It seems like we paid this coin in educational purpose just to see how bad some vps can be…

    • Francisco Dias's avatar
      Francisco Dias

      If you have weird issues with your VM with us, be sure to log a ticket so we can look into it 🙂 We’ve had some runescape botters that are getting the heeve-ho out the door soon so that’ll calm some of the CPU spikes we’ve had on some of the nodes.

      Best of luck to everyone!

      Francisco

    • earl's avatar
      earl

      your right.. Most times this VPS is pretty useless, good thing I canceled yesterday. It’s too bad thought cause support is actually quick to reply.

  28. Remember's avatar
    Remember

    I’m going to cancel their service.

    sectun:~# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
    4+0 records in
    4+0 records out
    262144 bytes (262 kB) copied, 75.6093 s, 3.5 kB/s

    • Bob's avatar
      Bob

      What node are you on? After the second reboot on Saturn, things have gotten a bit better.

      root@vps3:/home# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
      512+0 records in
      512+0 records out
      33554432 bytes (34 MB) copied, 9.70082 s, 3.5 MB/s
      root@vps3:/home#

      • Constantinos's avatar
        Constantinos

        Saturn shouldn’t have any load problems. Neptune is the only one left with some CPU spikes, we’re dealing with this.

      • Remember's avatar
        Remember

        I’m on neptune node,I’ve submitted tickets to you for more than a week,but things seemed not to be changed.

        • Raniel's avatar
          Raniel

          I’m on neptune too… cannot use my vps…

        • Yomero's avatar
          Yomero

          I’m on neptune too…
          My question, BIG QUESTION, is, what is the difference between

          dd if=/dev/zero of=test
          dd if=/dev/zero of=test conv=fdatasync
          dd if=/dev/zero of=test oflag=dsync

          And they are ordered in speed (dsync the slowest, I get like 2KB/s too)

        • rm's avatar
          rm

          @Yomero
          1) The default behaviour of dd is to not ‘sync’ (i.e. not ask the OS to completely write the data to disk before dd exiting). The first variant will just commit your 128 MB of test data into a RAM buffer, this will be really fast, and it will show you the benchmark result right away. The server in background continues to write out data from RAM to disk.

          2) conv=fdatasync asks dd to require a complete ‘sync’ once, right before dd exits. So it first commits 128 MB, then asks “OK, now ensure this is completely on disk”, and only then measues the total time it took to do all that, and calculates the benchmark result.

          3) oflag=dsync makes dd ask for completely synchronous output to disk, i.e. ensure that its write requests don’t even return until data is on disk. No wonder it is slowest, the write cache is basically unused in this case.

          I suggest to use conv=fdatasync as it seems to be the most realistic behaviour compared to real-world tasks.

        • Yomero's avatar
          Yomero

          Yes I think the same, fdatasync is more realistic. Thanks for the tip, i HOPE the people will READ you.

  29. Indra's avatar
    Indra

    At first everything quite acceptable, I don’t have issue with I/O, only issue ticket for tun/tap for openvpn and iptables modules which took some time (days). 2 days ago when everything ok suddenly my vps reboot and I can’t ssh to it, when I check with hypervm it’s different system os with centos (I’m on ubuntu before) and previous data gone. When I asked they said my data moved to another hard disk and told me to wait, so I wait… 1 day pass still in progress, just before there’s answer said it resolved but when I check again still it’s not, resource didn’t show disk status, inode status even max memory show less than I ordered. I’m on hipomenes node which looks ok

    • Constantinos's avatar
      Constantinos

      Hmm i don’t think you’re on Hipomenes, no new customers were added to that node. I believe you’re on node One.HostRail.com

  30. olaf padme's avatar
    olaf padme

    @Constantinos: is the duration of the discount also “Life of Account” as for the promo code “Lowendbox”?

  31. chachiri's avatar
    chachiri

    @Constantinos
    everytime when I try to log in I need to boot it from console first as
    it’s always frozen or something.
    why?

  32. chachiri's avatar
    chachiri

    Now even console is not working.

    • Constantinos's avatar
      Constantinos

      Console was fixed with all nodes, it could be something particular to your VPS

    • Constantinos's avatar
      Constantinos

      Live Chat was online today. Note that Live Chat is operated by Sales Personnel and not Support Personnel.

  33. Bob's avatar
    Bob

    Saturn is dead slow again… tsk tsk
    root@vps3:/home# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
    b512+0 records in
    512+0 records out
    33554432 bytes (34 MB) copied, 637.888 s, 52.6 kB/s
    I should have went to NordicVPS…

    • Yomero's avatar
      Yomero

      I think we must use conv=fdatasync instead oflag=dsync, as says rm.

  34. Spirit's avatar
    Spirit

    Saturn this moment:

    dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
    512+0 records in
    512+0 records out
    33554432 bytes (34 MB) copied, 163.217 s, 206 kB/s

    • Snape's avatar
      Snape

      On my HostRail VM, on the “Uranus” node:

      img:~# dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
      16384+0 records in
      16384+0 records out
      1073741824 bytes (1.1 GB) copied, 126.403 s, 8.5 MB/s

      For comparison, a $30 Seagate Dockstar hacked to run Debian on of a 4GB Kingston DT Mini Slim flash drive:

      root@debian:~# dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
      16384+0 records in
      16384+0 records out
      1073741824 bytes (1.1 GB) copied, 610 s, 1.8 MB/s

      Sadly, the Dockstar feels several times faster…

  35. sleddog's avatar
    sleddog

    After all the negative comments here (including mine) I’d like to say that my $1.20 HostRail VPS has been running great for the past week. Keep it up guys!

    • Constantinos's avatar
      Constantinos

      We’re trying our best, all the time we’re applying upgrades and patches to make servers quicker and quicker. Over the past weeks we’ve invested a lot of time and finances in making sure we have a rock solid environment – we hope slowly all/most problems will disappear.

    • Matt T.'s avatar
      Matt T.

      @sleddog
      Hi! Your status script is exactly what I’ve been looking for!
      Do you mind if I use it on my testsite with your #comments intact of course 🙂
      regards

      • sleddog's avatar
        sleddog

        @Matt T – Use away, that’s what it’s for 🙂

  36. Jeff's avatar
    Jeff

    Just ordered a “1 Power Unit” VPS with extra 512MB RAM and some extra CPU. $3.99/month with the discount code. Code still appears to be active.

  37. Remember's avatar
    Remember

    @Constantinos so , do you mean this problem was fixed for NEPTUNE?

    VPS:~# dd if=/dev/zero of=test bs=64k count=512 oflag=dsync
    512+0 records in
    512+0 records out
    33554432 bytes (34 MB) copied, 581.209 s, 57.7 kB/s

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *