Low End Virtual

eNetSouth – $7 2GB OpenVZ VPS in San Jose

Updated December 2011 — Both eNetSouth.com and eNSCloud.com stopped resolving since 11 November 2011. It has been confirmed that Brandon has done a runner.

eNetSouth Brandon from eNetSouth has just put up some new servers at SoftLayer in San Jose CA, and asked me to “catch us off guard”. So here’s the deal from them. With this sign up link, $7/month gets you this:

  • 2GB memory
  • 50GB storage
  • 1500GB/month data transfer on 1Gbps
  • 1x IPv4 + 1x IPv6
  • OpenVZ/SolousVM

Those are powered by Xeon E3-1270 Sandy Bridge CPUs. Test IP: 50.23.74.242. Instant activation, subject to IPv4 availability from upstream.

eNetSouth has grown quite a bit since Brandon started working full time on it. Now they have Brain working as full-time support there and Miguel doing part-time between colleges, so hopefully the ticket turn-around time would be shortened.

Disclaimer: LowEndTalk, the community website, runs on a VMWare server sponsored by eNetSouth.

948 Comments

  1. Adam's avatar
    Adam

    Just ordered one… This should be interesting 😉

  2. dmmcintyre3's avatar
    dmmcintyre3

    “Instant activation”
    Ordered one at 9:40 EDT and I don’t have it yet. I had manual activation go faster than this.

    • LEA's avatar
      LowEndAdmin Author

      Hehehe. I’ll see what Brandon says. Maybe they have already exhausted their current IP allocation and waiting for more from upstream?

      • rm's avatar
        rm

        > they have already exhausted their current IP allocation and waiting for more from upstream?

        Yeah especially those scarce IPv6 IPs, I wonder how can they possibly allocate a dedicated IPv6 address to every VPS, a whole ONE IPv6 ADDRESS at no charge, what a great offer, not something you come across every day. Is that even sustainable in the long run, what if they will run out??? 😛

      • Brandon - eNetSouth's avatar
        Brandon - eNetSouth

        No, I foolishly set the wrong block to the wrong nodes. When they were trying to auto create it would not because of “no available IP’s” .. Once I found my mistake its OK now.

        • john's avatar
          john

          he’s probably sleeping….
          I just want to see how fast/slow setup goes….

      • Adam's avatar
        Adam

        “They are incoming now. Had a blip with IP’s in the pool.” – Brandon

    • john's avatar
      john

      Hey brandon, do you use He.net among your networks?
      they have power failure every week now, so i was curious….

    • HuLuwa's avatar
      HuLuwa

      I think your support is very poor.I had an open ticket, but one month later, it was open yet.
      The node OVZ2 – San Jose has been down for one day, and it’s down yet.

      • lidouf's avatar
        lidouf

        I have ordered one VPS here last year, and it downed for a few days(about 6 days), and nobody handle this issue. I have submit many ticket to its support, nobody respond to me….

  3. Pinoy's avatar
    Pinoy

    More and more providers are now giving out 1 or 2gb vps for the lowend price 🙂

  4. eric dela cruz's avatar
    eric dela cruz

    hi

    We signed up and payed using paypal today but we had due invoice on client area and no email confimation from eNetsouth.

    hope this could be fixed.

    Thank you

  5. Miguel Ângelo Santos Pereira / MrGeneral's avatar
    Miguel Ângelo Santos Pereira / MrGeneral

    I’ll indeed be working @ eNetSouth (part-time), I’ll do my best to reduce the support queue and provide you a great service 🙂

    Regards,
    Miguel Ângelo

  6. Blackstorm72's avatar
    Blackstorm72

    Don’t overload. I would love to see a 2GB offer under $7 actually be successful enough and not deteriorate within a month.

    Then again, I just don’t see how its entirely possible with a 1Gbps link, 1.5TB and such. Hope it ends out well.
    (It’s probably possible, but it just doesn’t look like it)

      • Ricky's avatar
        Ricky

        Just grabbed one. Any luck for a fast activation?
        Hope there are enough IPs.

  7. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    Still have plenty available. We started with 253 IP’s free and we are authorized for more but we have to be at 100% to get them.

  8. maxexcloo's avatar
    maxexcloo

    I really want this offer to actually be stable and usable but I just can’t see it happening 😐
    I’ll come back in a month to see how it all turned out then decide 😛

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      It’s stable:

      dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
      16384+0 records in
      16384+0 records out
      1073741824 bytes (1.1 GB) copied, 3.63168 s, 296 MB/s

      And yes, that is with enough load and singups coming in to make WHMCS and SolusVM beg for mercy. At the rate sales are going this offer will not make it through a couple of days much less a month. 😉

      • vedran's avatar
        vedran

        You’re wrong, this offer is stable and usable. Everything else is dead or dying, but this offer still lives!

        • JTR's avatar
          JTR

          Ironically enough, you are correct.

        • Francisco Dias's avatar
          Francisco Dias

          For now.

          Why would you want to stick with a company that can’t fork the bill on 3 other colocations but is barely squeaking by on softlayer fee’s?

          If you’re going to use it for anything important at least keep daily backups.

          Francisco

  9. Ricky's avatar
    Ricky

    The file C:\sites\enetsouth.com\clients\dbconnect.php is corrupted.

    Um…?

  10. bengchacha's avatar
    bengchacha

    Ordered one. But still offline showed in SolousVM. And client area down?

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      Eric,

      Reply in the ticket with the PayPal information so I can manually mark the invoice and get you going. PayPal did not IPN the payment to WHMCS.

      Brandon

  11. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    WHMCS is having a issue now dealing with the requests. I’m working on that now.

    Hang tight a few minutes.

  12. Joe Mackey's avatar
    Joe Mackey

    Is this only for the first month, or a reoccurring payment?

    • Ricky's avatar
      Ricky

      First Payment Amount: $7.00 USD
      Recurring Amount: $7.00 USD
      Next Due Date: 11/05/2011

      • Joel Haasnoot's avatar
        Joel Haasnoot

        Pitty BTW the direct creditcard option is gone, now have to use Paypal. An email to remind me to pay each month would also be nice, but maybe it’s an option I’ve missed somewhere.

        Happy customer, my server is a little flaky and the control panel recently was reskinned.

        • Brandon - eNetSouth's avatar
          Brandon - eNetSouth

          Joel, I had to turn it off for new signups. Stolen card issues was just too much to deal with. We have always had a problem with fraud signups. I don’t know if everyone deals with it like we do. I’m certain a lot of providers have their fair share of it but there are at least 1 per day on the VMware side. Sometimes more.

          Customers want everything *instant*. To give that and not sit on a signup until we can check maxmind, IP’s, email it’s just best to let it be PayPal only. I remember getting the authorize.net account was cakewalk but to get the merchant account it was a pain. Credit checks, etc.. You have to actually be a real company.. Shocker.

          Anyways over the past 60 days we were hit with around a 4k fraud involving hot credit cards. They got around maxmind by purchasing with proxies in around the location of the stolen cards. The merchant saw the chargebacks and placed a 100% hold on all transactions and then was still hitting our checking account at the same time. So due to the fraud they were keeping the real money and draining us dry. Finally, they released it but after paying the chargeback fees and having to wait 45 days for the income from legit customers — it hurts.

          I still allow existing customers to use their cards but I will not accept any new signups on the OpenVZ side with credit cards. On the VMware side I check them out before I run them because the accounts are not instant setup.

          All of the bad press we get from taking so long on that end of the business is exactly from that. I just can’t absorb a 4-5k kick in the head due to fraud. $7.00 is pocket change but $7.00 x how ever many fraud signups plus $15.00 per chargeback and my time filling out the forms it gets real.

          I know it’s SPAM contracts and bot-nets but I can’t understand why people would find it that lucrative to do fraud on a VPS.

          Anyways — that is the deal with credit cards on signups.

        • Joel Haasnoot's avatar
          Joel Haasnoot

          I can’t reply to your comment, but I’ve got an existing KVM account and can’t pay my monthly bill by credit card. Paid that way the first time that way though. Understand the fraud I guess, but I am a current customer so what you say doesn’t match my payment options.

          On a side note, my KVM server went down… Was happy, not so much anymore, but I sent a ticket.

  13. bengchacha's avatar
    bengchacha

    [root@mjj ~]# wget http://cachefly.cachefly.net/100mb.test
    –2011-10-06 08:34:11– http://cachefly.cachefly.net/100mb.test
    Resolving cachefly.cachefly.net… 205.234.175.175
    Connecting to cachefly.cachefly.net|205.234.175.175|:80… connected.
    HTTP request sent, awaiting response… 200 OK
    Length: 104857600 (100M) [application/octet-stream]
    Saving to: `100mb.test’

    100%[======================================>] 104,857,600 85.9M/s in 1.2s

    2011-10-06 08:34:12 (85.9 MB/s) – `100mb.test’ saved [104857600/104857600]

  14. bengchacha's avatar
    bengchacha

    [root@mjj ~]# dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 9.05626 seconds, 119 MB/s

  15. dmmcintyre3's avatar
    dmmcintyre3
     ioping . -c 10
    4096 bytes from . (simfs /vz/private/440): request=1 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=2 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=3 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=4 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=5 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=6 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=7 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=8 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=9 time=0.1 ms
    4096 bytes from . (simfs /vz/private/440): request=10 time=0.1 ms
    
    --- . (simfs /vz/private/440) ioping statistics ---
    10 requests completed in 9002.0 ms, 9183 iops, 35.9 mb/s
    min/avg/max/mdev = 0.1/0.1/0.1/0.0 ms
    [root@panther ~]# dd if=/dev/zero of=test bs=16k count=64k conv=fdatasync
    65536+0 records in
    65536+0 records out
    1073741824 bytes (1.1 GB) copied, 3.72496 s, 288 MB/s
    
    wget -O /dev/null cachefly.cachefly.net/100mb.test
    --2011-10-06 08:51:06--  http://cachefly.cachefly.net/100mb.test
    Resolving cachefly.cachefly.net... 205.234.175.175
    Connecting to cachefly.cachefly.net|205.234.175.175|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 104857600 (100M) [application/octet-stream]
    Saving to: “/dev/null”
    
    100%[======================================>] 104,857,600 60.0M/s   in 1.7s    
    
    2011-10-06 08:51:08 (60.0 MB/s) - “/dev/null” saved [104857600/104857600]
    • dmmcintyre3's avatar
      dmmcintyre3

      Still good ~10hrs later
      Geekbench: http://browse.geekbench.ca/geekbench2/view/491593

      dd and ioping:

      4096 bytes from . (simfs /vz/private/440): request=1 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=2 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=3 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=4 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=5 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=6 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=7 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=8 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=9 time=0.1 ms
      4096 bytes from . (simfs /vz/private/440): request=10 time=0.1 ms
      
      --- . (simfs /vz/private/440) ioping statistics ---
      10 requests completed in 9001.9 ms, 10460 iops, 40.9 mb/s
      min/avg/max/mdev = 0.1/0.1/0.1/0.0 ms
      65536+0 records in
      65536+0 records out
      1073741824 bytes (1.1 GB) copied, 4.40416 s, 244 MB/s
  16. john's avatar
    john

    Order Number: 4191524287 please

  17. john's avatar
    john
    [root@ ~]# dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 3.79029 seconds, 283 MB/s

    something wrong? 🙂

  18. Ricky's avatar
    Ricky

    Something is very “wrong” here. =)

    dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 4.73269 seconds, 227 MB/s
    
  19. Joe Mackey's avatar
    Joe Mackey

    Wow! I am very impressed :). Fast setup, and fast network. I haven’t really had the vps long enough to test the up-time. But so far thanks for providing a wonderful service.

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      Thanks Joe!

      This node that we are filling now is running CentOS 6. I understand there is a possible OpenVZ kernel issue with CentOS 6. I know a script was sent out today in a update to run if you have kernel issues. We have not so for now it has not been ran. If needed we will run it and at worst case there is a CentOS 5 node that is identical and ready that we can migrate to if CentOS 6 becomes a problem.

      • Brandon - eNetSouth's avatar
        Brandon - eNetSouth

        I need to quit trying to type two messages at once. I tried to say “have not so far had any issues. So for now it has not been ran.”

  20. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    Everyone up to and including the last order has been processed and their servers have been delivered.

  21. t's avatar
    t

    Is Minecraft ‘acceptable’ on the server? I know you guys say Game Servers are A-OK in your AUP, but I’d just like to be sure..

  22. Kevin's avatar
    Kevin

    hello Brandon – eNetSouth:

    Order Number# 3445716461 and Invoice # 759 paid

    thanks

      • Kevin's avatar
        Kevin

        Been waiting over 6hrs now for activation. Hope it comes soon 🙂

        • Brandon - eNetSouth's avatar
          Brandon - eNetSouth

          I keep getting a error saying “could not create client” when creating it for you. I’m working on getting past that. Is your existing VPS with us a 50…. IP? If so I can simply custom upgrade you to this spec/price.

        • Kevin's avatar
          Kevin

          my existing VPS with you is 98….IP

  23. paul's avatar
    paul

    May I ask the hardware config of the nodes? 2gb is an awesome amount of memory for $7.

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      Sure. The nodes are 32GB each. 2 bonded Gigabit NIC’s each. Nodes that have local storage are 4 disk 1TB WD RE4’s. Adaptec Raid. Nodes that do not use local storage use iSCSI storage.

      CPU..

      Quad Core Xeon E31270 “Sandybridge” at 3.40Ghz each.

      processor       : 0
      vendor_id       : GenuineIntel
      cpu family      : 6
      model           : 42
      model name      : Intel(R) Xeon(R) CPU E31270 @ 3.40GHz
      stepping        : 7
      cpu MHz         : 3392.491
      cache size      : 8192 KB
      physical id     : 0
      siblings        : 8
      core id         : 0
      cpu cores       : 4
      apicid          : 0
      initial apicid  : 0
      fpu             : yes
      fpu_exception   : yes
      cpuid level     : 13
      wp              : yes
      flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
      bogomips        : 6784.98
      clflush size    : 64
      cache_alignment : 64
      address sizes   : 36 bits physical, 48 bits virtual
      power management:
      
      • Francisco Dias's avatar
        Francisco Dias

        Where did you get the 8GB sticks?

        The only sticks on the market are $400 – $500/ea and if you bought those that’s retarded 😛

        Francisco

        • Francisco Dias's avatar
          Francisco Dias

          Just playing the devils advocate 🙂 Don’t take it the wrong way, I just like to see where things add up and not with many of the offerings that hit here.

          Francisco

        • Francisco Dias's avatar
          Francisco Dias

          Not quite.

          You need DDR3 unbuffered ECC which aren’t on the market yet 🙂 The biggest sticks are 4GB for consumers to buy, anything bigger (like 8GB) need to be special ordered from samsung or some wacky named company that starts with an A. Either way, those companies are through the roof per stick.

          Francisco

        • paul's avatar
          paul

          Well, that is really surprising about the unbuffered memory since I’m used to server motherboards using registered. But here are some 8gb unbuffered at around $215 a stick:

          http://www.newegg.com/Product/Product.aspx?Item=N82E16820211564

          It does seem far from cost effective and maybe Brandon knows something we don’t ;-). I think I’d have used a different cpu that could use registered memory, or a MP server with more dimm sockets.

        • Francisco Dias's avatar
          Francisco Dias

          That’s desktop RAM 🙂

          Anyways, It isn’t about that the RAM, when available, will be well priced or not. It’s about that the RAM isn’t readily available. We went through this same ordeal when we did our building in August and ended up using xeon 5520’s instead.

          Francisco

        • Yomero's avatar
          Yomero

          Damn, why the server memory is cheaper than the Desktop? :S This is weird :S:S:S

  24. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    No worries.. I just don’t see a need to discuss private business matters in public. You understand I’m sure.

  25. john's avatar
    john

    Is anybody’s vps down?

  26. andy's avatar
    andy

    hi eNetSouth:

    I cannot pay for it when I check out by paypal

  27. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    Note to our potential customers from China.

    In WHMCS after the order is placed and you try to pay with PayPal there are reports of PayPal reporting a error.

    The resolution to this is to edit your address and change:

    Country: ‘CN’ to ‘HK’

    This will allow PayPal to function without error.

  28. Ricky's avatar
    Ricky
     cat /proc/user_beancounters
    Version: 2.5
           uid  resource                     held              maxheld              barrier                limit              failcnt
          448:  kmemsize                 13685899             30879744  9223372036854775807  9223372036854775807                    0
                lockedpages                     0                    0  9223372036854775807  9223372036854775807                    0
                privvmpages                357782               361217  9223372036854775807  9223372036854775807                    0
                shmpages                      671                 1007  9223372036854775807  9223372036854775807                    0
                dummy                           0                    0                    0                    0                    0
                numproc                        58                   75  9223372036854775807  9223372036854775807                    0
                physpages                  416413               501207                    0               524288                    0
                vmguarpages                     0                    0  9223372036854775807  9223372036854775807                    0
                oomguarpages               130147               130147  9223372036854775807  9223372036854775807                    0
                numtcpsock                      8                   35  9223372036854775807  9223372036854775807                    0
                numflock                       10                   11  9223372036854775807  9223372036854775807                    0
                numpty                          2                    2  9223372036854775807  9223372036854775807                    0
                numsiginfo                      0                   24  9223372036854775807  9223372036854775807                    0
                tcpsndbuf                  185432               612712  9223372036854775807  9223372036854775807                    0
                tcprcvbuf                  131072              5220248  9223372036854775807  9223372036854775807                    0
                othersockbuf                 4624                36992  9223372036854775807  9223372036854775807                    0
                dgramrcvbuf                     0                 3864  9223372036854775807  9223372036854775807                    0
                numothersock                   44                   51  9223372036854775807  9223372036854775807                    0
                dcachesize                9195019             27585824  9223372036854775807  9223372036854775807                    0
                numfile                       600                  735  9223372036854775807  9223372036854775807                    0
                dummy                           0                    0                    0                    0                    0
                dummy                           0                    0                    0                    0                    0
                dummy                           0                    0                    0                    0                    0
                numiptent                      24                   24  9223372036854775807  9223372036854775807                    0
    
    • Tom's avatar
      Tom

      Holy fucking hell, haven’t seen a more outrageous bean counters in a long time. Well at least no one should cry about fork error and no tickets to submit as this as probably as a high as it could go rofl.

      Ok so I’m an idiot, please explain, if you do not use bean counters for memory management, why aren’t you providing centos6/vswap vps that has a better memory accounting?

      • Brandon - eNetSouth's avatar
        Brandon - eNetSouth

        I wish I could tell you I had some magic sauce poured on the servers but the truth is this one is CentOS 6. vswap is not enabled but also the plan does not allow burst it is set to = RAM which would make burst = 0.

        So I think that OpenVZ on CentOS 6 does this by default and expects vswap to be present. That is why these figures are showing.

        • Tom's avatar
          Tom

          Ah, that makes some sense then.

        • dmmcintyre3's avatar
          dmmcintyre3

          If the node supports vswap it’s like this if there is no swap or there is swap.

  29. Pinoy's avatar
    Pinoy

    This is very tempting 🙂

      • Pinoy's avatar
        Pinoy

        I just submitted my order 🙂

        Im still happy with all my vmware servers. Hope this works very well!

        • Brandon - eNetSouth's avatar
          Brandon - eNetSouth

          Thank you!! I will always have a special place for VMware.. It’s great stuff.

          PS.. Your ready to go. Check your email.

  30. vedran's avatar
    vedran

    Sure, why not. I’m quite happy with their 1GB plan, and this one is basically the same with double RAM.

    I just hope my VPS will be activated soon so I can see if this one is any better (or at least the same).

    • vedran's avatar
      vedran

      IO is super fast, so is the network. But I didn’t get my 1x IPv6 🙁

      • Brandon - eNetSouth's avatar
        Brandon - eNetSouth

        What kind of performance in I/O are you seeing from the client end? The node is loaded now so this should be close to real world performance. I know the connectivity in testing all last week was 100MB 4 out of 5 times I tested it. Then it would be something around 60MB or so from time to time.

        Also, on the plan setup in SolusVM I did not set IPv6 = n (n = number of IPv6) so we will have to go back and assign those. Which is not OK but it will be made correct. I copied our 2GB plan template and it did not have it.

        • vedran's avatar
          vedran
          # dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
          16384+0 records in
          16384+0 records out
          1073741824 bytes (1.1 GB) copied, 4.26836 s, 252 MB/s

          Pretty good if you ask me.

        • Ricky's avatar
          Ricky

          Not yet close to the “real” world. I am still in Matrix.

          dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
          16384+0 records in
          16384+0 records out
          1073741824 bytes (1.1 GB) copied, 3.9263 seconds, 273 MB/s

  31. andy's avatar
    andy

    My Order Number is: 1490283709 please

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      Andy,

      Did you change your country from ‘CN’ to ‘HK’?

      This should allow it to work. If not I can hold a slot for you and we can do it manually later today.

  32. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    I don’t think I could complain about that. Not too much anyways. 😉

    Drop ioping on your box and see if it is still straight across the board when you get a chance. DD shows a good write statistic but sadly users containers do more than sequential writes 24/7.. Random r/rw statistics truly prove a stable underlying storage subsystem.

    • vedran's avatar
      vedran
      # ioping .
      ...
      --- . (simfs /vz/private/460) ioping statistics ---
      9 requests completed in 8403.3 ms, 10870 iops, 42.5 mb/s
      min/avg/max/mdev = 0.1/0.1/0.1/0.0 ms
      
      # ioping -R .
      
      --- . (simfs /vz/private/460) ioping statistics ---
      27415 requests completed in 3000.0 ms, 21368 iops, 83.5 mb/s
      min/avg/max/mdev = 0.0/0.0/0.6/0.0 ms
      
      # ioping -RL .
      
      --- . (simfs /vz/private/460) ioping statistics ---
      7789 requests completed in 3000.0 ms, 3257 iops, 814.1 mb/s
      min/avg/max/mdev = 0.3/0.3/16.8/0.2 ms

      Now I just have to find something to compare it against

      • Brandon - eNetSouth's avatar
        Brandon - eNetSouth

        The way that works is you want to see the deviation as low as possible.

        If my max dev. is .2 — I will take that any day of the week/month .. year.

        Storage is still epic even with the load on this node. 😉

  33. Adam's avatar
    Adam

    Are the servers colocated at Softlayer?

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      No, they are leased servers that I requested the specifications on. I do not think that SoftLayer even allows colo. I think their entire model is built around certain base build servers that they pre-rack and customize for anything over the base setup. I’ve never seen colo being a option.

      • Pinoy's avatar
        Pinoy

        What datacenter are you using for these servers?

      • Pinoy's avatar
        Pinoy

        Tracert shows me this

         1  fa-0-0-7206a-xxxxxxx (xxxxxx)  3.501 ms  3.456 ms  3.446 ms
         2  210.5.xxxx (xxxxxxxxxx)  7.471 ms  7.464 ms  7.456 ms
         3  210.213.130.62.static.pldt.net (210.213.130.62)  14.941 ms  14.934 ms  18.68 5 ms
         4  210.213.130.141.static.pldt.net (210.213.130.141)  9.531 ms  9.524 ms  9.516  ms
         5  210.213.128.5.static.pldt.net (210.213.128.5)  160.016 ms  160.009 ms  160.9 76 ms
         6  xe-0-6-0-0.r04.lsanca03.us.bb.gin.ntt.net (204.1.254.81)  188.884 ms  185.35 7 ms  185.907 ms
         7  ae-3.r05.lsanca03.us.bb.gin.ntt.net (129.250.2.221)  186.645 ms  186.654 ms   186.619 ms
         8  te1-5.bbr01.cs01.lax01.networklayer.com (198.172.90.82)  184.727 ms  185.683  ms  186.575 ms
         9  ae0.bbr02.eq01.sjc02.networklayer.com (173.192.18.150)  180.791 ms  180.209  ms  180.171 ms
        10  ae5.dar02.sr01.sjc01.networklayer.com (173.192.18.251)  216.438 ms  185.735  ms  185.588 ms
        11  po2.fcr01.sr01.sjc01.networklayer.com (50.23.118.133)  179.080 ms  179.763 m s  179.646 ms
        12  50.23.74.243-static.reverse.softlayer.com (50.23.74.243)  179.440 ms  179.94 3 ms  179.796 ms
        
        • Brandon - eNetSouth's avatar
          Brandon - eNetSouth

          They build a DC in Asia last month that went active on 10-3-2011. So latency should be OK between any US Softlayer node and there.

          What do you get to your VMware hosts with us in SJC?

        • Pinoy's avatar
          Pinoy

          Ping time on my vmware in sjc is around 200.

          Do you have plans on hosting vmware plans on this DC?

      • drmike's avatar
        drmike

        I do not think that SoftLayer even allows colo.

        When they were ev1, they used to. Single, racks, and cages.

        They pushed you into also leasing the server hardware when you did so and/or a hands on contract.

        Never followed up on that. As I write this, I’m wondering how they handled third party access to the datacenter.

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *