Low End Virtual

eNetSouth – $7 2GB OpenVZ VPS in San Jose

Updated December 2011 — Both eNetSouth.com and eNSCloud.com stopped resolving since 11 November 2011. It has been confirmed that Brandon has done a runner.

eNetSouth Brandon from eNetSouth has just put up some new servers at SoftLayer in San Jose CA, and asked me to “catch us off guard”. So here’s the deal from them. With this sign up link, $7/month gets you this:

  • 2GB memory
  • 50GB storage
  • 1500GB/month data transfer on 1Gbps
  • 1x IPv4 + 1x IPv6
  • OpenVZ/SolousVM

Those are powered by Xeon E3-1270 Sandy Bridge CPUs. Test IP: 50.23.74.242. Instant activation, subject to IPv4 availability from upstream.

eNetSouth has grown quite a bit since Brandon started working full time on it. Now they have Brain working as full-time support there and Miguel doing part-time between colleges, so hopefully the ticket turn-around time would be shortened.

Disclaimer: LowEndTalk, the community website, runs on a VMWare server sponsored by eNetSouth.

948 Comments

  1. shadowlin's avatar
    shadowlin

    well,if the server is fine now:)
    when the tun thing can be resolved?
    am i asking for too much?lol

  2. Alex Jordan's avatar
    Alex Jordan

    Yeeey, server back online.

  3. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    Lets see how this latest change works out. Thank you all very much for your courtesy, patience and understanding while we get this worked out. You don’t know how much I appreciate it.

    I’m not one for taking “stabs in the dark” to find a resolution.

    I notice there is a upstream patch for the current kernel I am running. I’m going to see if it has a fix for what we are seeing or give up on 6.0 2.6.32 and fall back to 5.6 2.6.18

    One of those two things are happening today.

    Brandon

  4. apptoday.us's avatar
    apptoday.us

    I have successfully ordered three days ago, I hope will be long-term service

  5. Alex Jordan's avatar
    Alex Jordan

    Brandon could you help me out with ticket #117198 ?
    Thanks

  6. BH - eNetSouth's avatar
    BH - eNetSouth

    Update: ovz6 is performing perfectly at 2.6.32 kernel/ 042stab037.1 openVZ after the last changes.

    dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 6.14219 s, 175 MB/s
    
    Running ioping -c 10 /var/www/html:
    4096 bytes from /var/www/html (simfs /vz/private/440): request=1 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=2 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=3 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=4 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=5 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=6 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=7 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=8 time=0.1 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=9 time=5.0 ms
    4096 bytes from /var/www/html (simfs /vz/private/440): request=10 time=0.1 ms
    
    --- /var/www/html (simfs /vz/private/440) ioping statistics ---
    10 requests completed in 9006.6 ms, 1728 iops, 6.7 mb/s
    min/avg/max/mdev = 0.1/0.6/5.0/1.5 ms
    
    top - 17:15:30 up 12:33,  2 users,  load average: 3.71, 4.39, 5.40
    Tasks: 2482 total,   3 running, 2470 sleeping,   1 stopped,   8 zombie
    Cpu(s): 21.9%us,  4.3%sy, 24.4%ni, 39.0%id,  2.9%wa,  0.0%hi,  0.4%si,  0.0%st
    

    Enjoy! Please contact support if there are any outstanding issues.

    • eric dela cruz's avatar
      eric dela cruz

      what about tun? does it mean you had solutions for this?>

  7. HuluWa's avatar
    HuluWa

    VPS Support 09/21/2011 00:36 Mail System Issue? Open Medium

  8. Benjamin's avatar
    Benjamin

    My VPS is still unusable… >.<
    Solus marks it as offline, SSH hangs after I type in my username before I key in my password.

  9. bengchacha's avatar
    bengchacha

    down again? load average more than 12

    • Khafi's avatar
      Khafi

      yeah it down again…
      brandon is busyman since yesterday…

  10. john's avatar
    john

    This is totally not fair, not at all.

    • Blackstorm72's avatar
      Blackstorm72

      I wouldn’t complain, $7 for a 2GB VPS, and Brandon is working on CentOS 6 with all that kernel trouble.
      If I had the $7 to spare (I don’t… really) I’d totally chime in. 😛

      Hey, at least he’s on here, telling you whats going on, and at least keeping everyone updated. Half of the providers barely do that.

  11. BH - eNetSouth's avatar
    BH - eNetSouth

    This is Brian posting under Brandons account because of the validation.

    There is another problem. I have the node back up and looking at logs to find out why it went down again.

    I will start the containters as soon as I know.

  12. Benjamin's avatar
    Benjamin

    My server is back online! Solusvm shows it as online, and SSH access is fully restored. The previous random hangs is now gone too it seems. Wonder if this means everything’s solved, hopefully not just another respite. =)

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      When were you seeing these random hangs? Previously this evening or all day today or all the time prior to this last issue?

      (P.S.. trying to use the internet with 300+ms latency is sad.. very sad)

      • john's avatar
        john

        Are you sticking with 6 or thinking moving to 5.6?

        • Benjamin's avatar
          Benjamin

          Brandon do you have some HTTP caching program running on port 80? I have a non-HTTP server that ran on port 80 with my old host fine, but here using telnet on port 80 from my home(note: telnet 127.0.0.1 doesn’t seem to give this problem) I get a HTTP response out of nowhere.

        • Brandon - eNetSouth's avatar
          Brandon - eNetSouth

          I’m deciding on trying the latest 2.6.32-042stab039.2 or going back to 5.6. Going back to 5.6 would be the longest downtime but almost a certain fix.

          Going to 2.6.32-042stab039.2 is the last item left in the bag of tricks. I’m beginning to thing that sadly, 6 is simply junk at this point.

  13. Shun's avatar
    Shun

    But something has been change
    The ram size changed to 1.95GB from 2GB 🙁

  14. Benjamin's avatar
    Benjamin

    My VPS was previously offline most of the time I tried to use it, but when it was online it kept hanging. But it seems since my last reply all has been fine.

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      I replied wrong to you when answering John. Read above.. Anyways – there is nothing that I would have running on your IP on port 80.

  15. dmmcintyre3's avatar
    dmmcintyre3

    Performance is much better today than it was on Friday. Current uptime is 10 hours.

  16. ZAY's avatar
    ZAY

    @Brandon: Hate to use LEB as a support desk, but is there any chance you can take a look at [Ticket ID: 450756] please? Thanks!

  17. Benjamin's avatar
    Benjamin

    Things are appearing good:
    top – 05:15:47 up 15:14, 1 user, load average: 0.00, 0.00, 0.00

    • paul's avatar
      paul

      That’s the load on your personal VPS and doesn’t reflect what other containers in the same node are doing. It would be interesting if the host allowed users to monitor the overall load on the entire node.

      • danielfeng's avatar
        danielfeng

        People might get shocked if they were able to do that. Maybe ramhost is the only vendor who provides real time node monitor for OpenVZ? Too bad I’ve never had a chance to grab one plan from there.

        • rm's avatar
          rm

          On (some?) Linux-VServer VPSes you get to see whole node CPU loads 😀
          And data transferred seen in ifconfig eth0 is for the h/w node too 🙂

        • Yomero's avatar
          Yomero

          +1 to rm. I have used Dreamhost VPSs and have that behavior.

      • Yomero's avatar
        Yomero

        Believe me, sometimes it reflect it. When you are doing nothing and have a load of 5 then you have problems…

        But I guess this post was to show the uptime.

      • Benjamin's avatar
        Benjamin

        I wasn’t showing top for the load, I was showing it for the uptime…. -.-

      • BH - eNetSouth's avatar
        BH - eNetSouth
        top - 21:05:49 up 16:09,  1 user,  load average: 7.34, 6.70, 5.97
        Tasks: 2456 total,   6 running, 2441 sleeping,   2 stopped,   7 zombie
        Cpu(s): 24.0%us,  5.7%sy, 42.4%ni, 26.6%id,  0.9%wa,  0.0%hi,  0.4%si,  0.0%st

        The fix appears to be this:

        Linux ovz6.enetsouth.com 2.6.32-042stab039.2 #1 SMP Fri Oct 7 13:21:15 MSD 2011 x86_64 x86_64 x86_64 GNU/Linux

        Compiled last Friday. Patched around 4:50 this AM.

  18. Benjamin's avatar
    Benjamin

    Btw @Brandon, the RAM decreased to 2000MB, but shouldn’t 2GB be 2048MB?
    Not that it matters, I’d hardly cross the 128MB mark anyways.

    • BH - eNetSouth's avatar
      BH - eNetSouth

      During one of the crash events over the past two days SolusVM stopped “accounting” for containers. It was 100% everything for everyone. A simple script was applied to the node to set accounting for the containters. Why it set 2000 instead of 2048 I do not know. Also it seems some containers were set to 2 cpu instead of 4. The values are defined at the top of the script and applied the same to everyone. These can be set back now in SolusVM which was not possible yesterday.

      • Kairus's avatar
        Kairus

        Are we supposed to be allocated 2, or 4 cores?

  19. Khafi's avatar
    Khafi

    hope this time will be stable….
    yes.. the vps performance is much better… seem brandon move it to another hardware…

  20. BH - eNetSouth's avatar
    BH - eNetSouth

    4

    If you have not already opened a ticket please verify and open one requesting for it to be changed.

    • john's avatar
      john

      Hey Brian, would you take care of Ticket #252901.?

      • john's avatar
        john

        thanks, it was fast.

    • Kairus's avatar
      Kairus

      Regarding the CPU cores, could you guys look at ticket #102329?

    • eric dela cruz's avatar
      eric dela cruz

      same here

  21. Alex Jordan's avatar
    Alex Jordan

    I can’t connect to my server, submitted a support ticket 5 days ago, still no answer…

  22. BH - eNetSouth's avatar
    BH - eNetSouth

    We have decided to give up any hopes of using 6.0 kernels.

    We are going back to 5.6 today. There will be serveral minutes of dowtime today while the containers are stopped and the OS is rolled back.

    It seems without a doubt that this will resolve the crashing and lockups.

    • shadowlin's avatar
      shadowlin

      yep,make it more stable first..
      i don’t see anything fancy of 6.0 but the endless crash:<
      and if the 5.6 works fine,please try to solve the tun thing.i really need my openvpn.lol

    • Miguel Ângelo Santos Pereira / MrGeneral's avatar
      Miguel Ângelo Santos Pereira / MrGeneral

      What about replying me? 🙂

    • john's avatar
      john

      so all of this will finish today?

    • danielfeng's avatar
      danielfeng

      A dumb question, is it due to the kernel or CentOS? Personally I don’t like CentOS much because of its delay and lack of support. If possible you may try SL on host instead.
      But as I said it might be a dumb question. I’m not an admin.

      • Yomero's avatar
        Yomero

        Another dumb question, what means SL. Softlayer? lol

      • BH - eNetSouth's avatar
        BH - eNetSouth

        It is being considered as a less invasive approach to resolution. There are discussions out there that it resolves this exact problem:

        Oct 10 02:15:20 ovz6 kernel: [76545.975075] [] ?
        vzdq_aquotq_lookup+0xf7/0x150 [vzdquota]

        Full trace below:

        Oct 10 02:15:19 ovz6 kernel: [76545.390522] WARNING: at fs/inode.c:792
        unlock_new_inode+0x62/0x70() (Not tainted)
        Oct 10 02:15:19 ovz6 kernel: [76545.435410] Hardware name: X9SCI/X9SCA
        Oct 10 02:15:20 ovz6 kernel: [76545.457928] Modules linked in: vzethdev simfs
        vzrst vzcpt nfs lockd fscache nfs_acl auth_rpcgss sunrpc vzdquota ip6t_REJECT
        ip6table_mangle ip$
        Oct 10 02:15:20 ovz6 kernel: [76545.813553] Pid: 130726, comm: cat Not tainted
        2.6.32-042stab039.2 #1
        Oct 10 02:15:20 ovz6 kernel: [76545.852156] Call Trace:
        Oct 10 02:15:20 ovz6 kernel: [76545.866915] [] ?
        warn_slowpath_common+0x87/0xc0
        Oct 10 02:15:20 ovz6 kernel: [76545.904083] [] ?
        warn_slowpath_null+0x1a/0x20
        Oct 10 02:15:20 ovz6 kernel: [76545.940086] [] ?
        unlock_new_inode+0x62/0x70
        Oct 10 02:15:20 ovz6 kernel: [76545.975075] [] ?
        vzdq_aquotq_lookup+0xf7/0x150 [vzdquota]
        Oct 10 02:15:20 ovz6 kernel: [76546.017363] [] ?
        do_lookup+0x1c6/0x250
        Oct 10 02:15:20 ovz6 kernel: [76546.049735] [] ?
        __link_path_walk+0x89e/0x1110
        Oct 10 02:15:20 ovz6 kernel: [76546.086263] [] ?
        __d_lookup+0xad/0x150
        Oct 10 02:15:20 ovz6 kernel: [76546.118640] [] ?
        __link_path_walk+0xe68/0x1110
        Oct 10 02:15:20 ovz6 kernel: [76546.155170] [] ?
        path_walk+0x6a/0xe0
        Oct 10 02:15:20 ovz6 kernel: [76546.186542] [] ?
        do_path_lookup+0x5b/0xa0
        Oct 10 02:15:20 ovz6 kernel: [76546.220559] [] ?
        do_filp_open+0xfb/0xcd0
        Oct 10 02:15:20 ovz6 kernel: [76546.254050] [] ?
        call_filldir+0x7c/0x120 [ext4]
        Oct 10 02:15:20 ovz6 kernel: [76546.291157] [] ?
        __utrace_engine_release+0x0/0x50
        Oct 10 02:15:20 ovz6 kernel: [76546.329207] [] ?
        __mutex_lock_killable_slowpath+0x70/0x1d0
        Oct 10 02:15:20 ovz6 kernel: [76546.371965] [] ?
        strncpy_from_user+0x4a/0x90
        Oct 10 02:15:20 ovz6 kernel: [76546.407516] [] ?
        alloc_fd+0x92/0x160
        Oct 10 02:15:20 ovz6 kernel: [76546.438819] [] ?
        do_sys_open+0x69/0x140
        Oct 10 02:15:20 ovz6 kernel: [76546.471696] [] ?
        compat_sys_open+0x1a/0x20
        Oct 10 02:15:20 ovz6 kernel: [76546.506151] [] ?
        ia32_sysret+0x0/0x5
        Oct 10 02:15:20 ovz6 kernel: [76546.537500]

        • john's avatar
          john

          so what are you doing?
          can we use our box now or wait?
          would you tell us what to do rather than hang in the dark?

  23. Benjamin's avatar
    Benjamin

    uptime – 19:13:06 up 14 min

  24. eric's avatar
    eric

    this could be the best way to resolved all said issues including modprobe tun 😀

    waiting for result and ticket to be answered.

  25. Shamli's avatar
    Shamli

    wonder when will be available again…..=)

  26. BH - eNetSouth's avatar
    BH - eNetSouth

    @John

    There will be a downtime announcement posted here soon. During that time the changes will be made. The change (kern/OS choice) decision will based on information from testing that is currently being performed now.

  27. BH - eNetSouth's avatar
    BH - eNetSouth

    ** Please read **

    Both nodes in San Jose will be taken off-line for OS changes by 3:15PM CDT.

    I expect this to take less than 30 minutes. Unless a unforseen issue occurs these nodes will be serving you by 3:45PM CDT at the latest.

    • john's avatar
      john

      hey, brian, would you post here as soon as it’s done?

  28. Tom's avatar
    Tom

    Don’t know how people buy this, seems like a 4 days state of constant downtimes, if you can’t get any stability you should have beta tested before spelling such crap.

    • danielfeng's avatar
      danielfeng

      I would prefer a 1GB RAM OpenVZ VPS for $3.50/m as a backup server, or 512MB for $1.75/m…

    • Brandon - eNetSouth's avatar
      Brandon - eNetSouth

      It was tested. Very well. The problem with 2.6.32 vz patched kerns is that they crash under load. Not just normal testing load but real world customer load. They were flawless and performed *very* well during testing.

  29. Brandon - eNetSouth's avatar
    Brandon - eNetSouth

    Just to update everyone — New identical nodes were provisioned this evening with CentOS 5.7 x64 and 2.6.18-274.3.1.el5.028stab094.3… 2.6.32el Cent,SL,RHEL patched OpenVZ kernels are simply broken. Period.

    Everyone’s containers are currently migrating to the new nodes now. Have been for a couple hours now. They are live migrations unless they error then they are powered off before the migrate. I did not want to risk restoring containers manually.

    This without a doubt will end the random stability issues.

    • Kairus's avatar
      Kairus

      Thanks for the update.

    • danielfeng's avatar
      danielfeng

      Sigh, as an Arch fan 2.6.18 kernel is a nightmare for sure. I just fixed the tty problem on Arch after update. Interestingly my VPS is at UptimeVPS but the solution was found on RAMHost forum and now I am discussing with eNetSouth. I’m going to trouble shoot another issue on Arch. Man I think OpenVZ should BAN all Arch users forever, so that we can simply use Xen or KVM, LOL.

      • Brandon - eNetSouth's avatar
        Brandon - eNetSouth

        I have to agree with you 100%.

        My current issue is that I feel so let down with CentOS now and even OpenVZ to a extent. I know that OpenVZ kernels are built on RHEL kernels so it really does not matter much about your distro unless it is RHEL. What has me so mad is that they are taunting people to move to the 6.0 kernels. Calling them stable. I put my trust in the fact that it indeed was and no — not by a long shot.

        I was reading where CentOS is basically in shambles and updates are taking forever. The big move now is to Scientific Linux. I tried that as well with this but it simply is a OpenVZ kernel issue that is carrying bugs from the 6.0 RHEL kernel. It’s all broken.

        I’m not supposed to complain because it is open source. Right? Sure, it is open but people are depending on it functioning and it simply does not.

        I embrace 2.6.18 with open arms. 🙂

        • eric dela cruz's avatar
          eric dela cruz

          any update bout tun?

        • vedran's avatar
          vedran

          Something went terribly wrong, I have 32GB of available RAM. 😮

      • Francisco Dias's avatar
        Francisco Dias

        Anyone asking for Arch we just tell them to go with KVM and be done with it 😛

        Brandon made a good call ditching .32 for the time being. At some point it’ll be stable but in the current state it’s a complete and utter mess and just scary to use.

        Francisco

        • danielfeng's avatar
          danielfeng

          So I guess on 15th KVM would be my only option. 🙂

        • Francisco Dias's avatar
          Francisco Dias

          Well, there are OVZ templates that work on OVZ for anyone, but the latest/greatest glibc’s require a .37 kernel or something insane like that. While the OVZ devs have tried to backport certain features to make debian/etc work well, I don’t think the arch devs are able to really compile glibc different this time 🙁

          Francisco

        • danielfeng's avatar
          danielfeng

          For Arch with a .18 host, I’m using glibc from here:
          https://wiki.archlinux.org/index.php/VPS_Repo

          But still the udev doesn’t work well. Also I am always worrying about breaking the system after upgrade since Arch repo is now on the 3.0.x kernel.

  30. vedran's avatar
    vedran
    # free
                 total       used       free     shared    buffers     cached
    Mem:      32882224     249568   32632656          0          0          0
    -/+ buffers/cache:     249568   32632656
    Swap:            0          0          0
    

    I think they have bigger problems than tun/tap or IPv6 right now :S

    • danielfeng's avatar
      danielfeng

      If it were possible on OVZ then you might want to be a reseller and we can share the bill, e.g., $0.875/m for 4GB ram. I would like to pay some extra like $1/m for that. 🙂

    • Yomero's avatar
      Yomero

      I have more RAM than you n_n

                   total       used       free     shared    buffers     cached
      Mem:      32882224      14436   32867788          0          0          0
      -/+ buffers/cache:      14436   32867788
      Swap:            0          0          0
      
    • BH - eNetSouth's avatar
      BH - eNetSouth

      This was because everyone was migrated from a 6.0 node that supports vSwap. Everyones config file had vSwap enabled and beancounters was maxed out 9999999999999 because of that. It is now set properly.

  31. Waiting's avatar
    Waiting

    zzzzzzzzzzzzzzZZZZZZZZZ… When will they be stable and available again?

  32. Kairus's avatar
    Kairus

    32GB of ram as well over here. Server rebooted again too :(.

    • BH - eNetSouth's avatar
      BH - eNetSouth

      [root@ovz7 ~]# uptime
      11:50:39 up 12:04, 1 user, load average: 4.27, 3.45, 3.52

      The last reboot was bringing the node back from adding the OpenVZ kernel at 11:49 PM CDT last night! Your VPS may have restarted due to the script that sets the properties right or from the migration. The nodes themselves have not.

Leave a Reply

Before you comment
  • Please use your hosting provider's support system for service issues.
  • Comments may be held temporarily for spam review.
  • Use <pre>...</pre> for terminal output, or link to a paste service.

Your email address will not be published. Required fields are marked *